MC68HC05L28 Datasheet, PDF (133/156 Pages) Motorola, Inc – Flexible general-purpose microcomputer

14
ORDERING INFORMATION
This section describes the information needed to order the MC68HC05L28 or MC68HC705L28.
To initiate a ROM pattern for the MCU, it is necessary to contact your local field service office, local
sales person or Motorola representative. Please note that you will need to supply details such as:
mask option selections, temperature range, oscillator frequency, package type, electrical test
requirements and device marking details so that an order can be processed, and a customer
specific part number allocated. Refer to Table 14-1 for appropriate part numbers.
Device title
MC68HC05L28
MC68HC705L28
Table 14-1 MC order numbers
Package type
56-pin SDIP
56-pin SDIP (OTP)
Temperature
Part number
0 to +70°C MC68HC05L28B
0 to +70°C MC68HC705L28B
14.1 EPROM
A 16K byte EPROM programmed with the customer’s software (positive logic for address and data)
should be submitted for pattern generation. All unused bytes should be programmed to $00.
The EPROM should be clearly labelled, placed in a conductive IC carrier and securely packed.
14.2 Verification media
All original pattern media (EPROMs) are filed for contractual purposes and are not returned. A
computer listing of the ROM code will be generated and returned with a listing verification form.
The listing should be thoroughly checked and the verification form completed, signed and returned
to Motorola. The signed verification form constitutes the contractual agreement for creation of the
custom mask. If desired, Motorola will program blank EPROMs (supplied by the customer) from
the data file used to create the custom mask, to aid in the verification process.
14
MC68HC05L28
ORDERING INFORMATION
TPG
MOTOROLA
14-1