PIC18F6390 Datasheet, PDF (329/412 Pages) Microchip Technology – 64/80-Pin Flash Microcontrollers with LCD Driver and nanoWatt Technology

PIC18F6390/6490/8390/8490
RETURN
Syntax:
Operands:
Operation:
Status Affected:
Encoding:
Description:
Words:
Cycles:
Q Cycle Activity:
Q1
Decode
No
operation
Return from Subroutine
RETURN {s}
s ∈ [0,1]
(TOS) → PC,
if s = 1
(WS) → W,
(STATUSS) → Status,
(BSRS) → BSR,
PCLATU, PCLATH are unchanged
None
0000 0000 0001 001s
Return from subroutine. The stack is
popped and the top of the stack (TOS)
is loaded into the program counter. If
‘s’= 1, the contents of the shadow
registers, WS, STATUSS and BSRS,
are loaded into their corresponding
registers, W, Status and BSR. If
‘s’ = 0, no update of these registers
occurs (default).
1
2
Q2
No
operation
No
operation
Q3
Process
Data
No
operation
Q4
POP PC
from stack
No
operation
Example:
RETURN
After Interrupt
PC = TOS
RLCF
Syntax:
Operands:
Operation:
Status Affected:
Encoding:
Description:
Rotate Left f through Carry
RLCF f {,d {,a}}
0 ≤ f ≤ 255
d ∈ [0,1]
a ∈ [0,1]
(f<n>) → dest<n + 1>,
(f<7>) → C,
(C) → dest<0>
C, N, Z
0011 01da ffff ffff
The contents of register ‘f’ are rotated
one bit to the left through the Carry
flag. If ‘d’ is ‘0’, the result is placed in
W. If ‘d’ is ‘1’, the result is stored back
in register ‘f’ (default).
If ‘a’ is ‘0’, the Access Bank is
selected. If ‘a’ is ‘1’, the BSR is used to
select the GPR bank (default).
If ‘a’ is ‘0’ and the extended instruction
set is enabled, this instruction
operates in Indexed Literal Offset
Addressing mode whenever
f ≤ 95 (5Fh). See Section 24.2.3
“Byte-Oriented and Bit-Oriented
Instructions in Indexed Literal Offset
Mode” for details.
C
register f
Words:
Cycles:
Q Cycle Activity:
Q1
Decode
1
1
Q2
Read
register ‘f’
Q3
Process
Data
Q4
Write to
destination
Example:
RLCF
REG, 0, 0
Before Instruction
REG =
C
=
After Instruction
REG =
W
=
C
=
1110 0110
0
1110 0110
1100 1100
1
 2004 Microchip Technology Inc.
Preliminary
DS39629B-page 327