PIC18F6390 Datasheet, PDF (30/412 Pages) Microchip Technology – 64/80-Pin Flash Microcontrollers with LCD Driver and nanoWatt Technology

PIC18F6390/6490/8390/8490
TABLE 1-3: PIC18F8X90 PINOUT I/O DESCRIPTIONS (CONTINUED)
Pin Name
Pin Number _{Pin Buffer}
TQFP ^{Type Type}
Description
PORTH is a bidirectional I/O port.
RH0/SEG47
RH0
SEG47
79
I/O ST
Digital I/O.
O Analog SEG47 output for LCD.
RH1/SEG46
RH1
SEG46
80
I/O ST
Digital I/O.
O Analog SEG46 output for LCD.
RH2/SEG45
RH2
SEG45
1
I/O ST
Digital I/O.
O Analog SEG45 output for LCD.
RH3/SEG44
RH3
SEG44
2
I/O ST
Digital I/O.
O Analog SEG44 output for LCD.
RH4/SEG40
RH4
SEG40
22
I/O ST
Digital I/O.
O Analog SEG40 output for LCD.
RH5/SEG41
RH5
SEG41
21
I/O ST
Digital I/O.
O Analog SEG41 output for LCD.
RH6/SEG42
RH6
SEG42
20
I/O ST
Digital I/O.
O Analog SEG42 output for LCD.
RH7/SEG43
RH7
SEG43
19
I/O ST
Digital I/O.
O Analog SEG43 output for LCD.
Legend: TTL = TTL compatible input
ST = Schmitt Trigger input with CMOS levels
I = Input
P = Power
CMOS
Analog
O
OD
= CMOS compatible input or output
= Analog input
= Output
= Open-Drain (no P diode to VDD)
Note 1: Default assignment for CCP2 when configuration bit CCP2MX is set.
2: Alternate assignment for CCP2 when configuration bit CCP2MX is cleared.
DS39629B-page 28
Preliminary
 2004 Microchip Technology Inc.