PIC18F6390 Datasheet, PDF (31/412 Pages) Microchip Technology – 64/80-Pin Flash Microcontrollers with LCD Driver and nanoWatt Technology

PIC18F6390/6490/8390/8490
TABLE 1-3: PIC18F8X90 PINOUT I/O DESCRIPTIONS (CONTINUED)
Pin Name
Pin Number _{Pin Buffer}
TQFP ^{Type Type}
Description
PORTJ is a bidirectional I/O port.
RJ0/SEG32
RJ0
SEG32
62
I/O ST
Digital I/O.
O Analog SEG32 output for LCD.
RJ1/SEG33
RJ1
SEG33
61
I/O ST
Digital I/O.
O Analog SEG33 output for LCD.
RJ2/SEG34
RJ2
SEG34
60
I/O ST
Digital I/O.
O Analog SEG34 output for LCD.
RJ3/SEG35
RJ3
SEG35
59
I/O ST
Digital I/O.
O Analog SEG35 output for LCD.
RJ4/SEG39
RJ4
SEG39
39
I/O ST
Digital I/O.
O Analog SEG39 output for LCD.
RJ5/SEG38
RJ5
SEG38
40
I/O ST
Digital I/O
O Analog SEG38 output for LCD.
RJ6/SEG37
RJ6
SEG37
41
I/O ST
Digital I/O.
O Analog SEG37 output for LCD.
RJ7/SEG36
RJ7
SEG36
42
I/O ST
Digital I/O.
O Analog SEG36 output for LCD.
VSS
11, 31, 51, 70 P
— Ground reference for logic and I/O pins.
VDD
12, 32, 48, 71 P
— Positive supply for logic and I/O pins.
AVSS
26
P
— Ground reference for analog modules.
AVDD
25
P
— Positive supply for analog modules.
Legend: TTL = TTL compatible input
ST = Schmitt Trigger input with CMOS levels
I = Input
P = Power
CMOS
Analog
O
OD
= CMOS compatible input or output
= Analog input
= Output
= Open-Drain (no P diode to VDD)
Note 1: Default assignment for CCP2 when configuration bit CCP2MX is set.
2: Alternate assignment for CCP2 when configuration bit CCP2MX is cleared.
 2004 Microchip Technology Inc.
Preliminary
DS39629B-page 29