ISL78226 Datasheet, PDF (94/94 Pages) Intersil Corporation – Cycle-by-cycle peak current limiting

ISL78226
Package Outline Drawing
For the most recent package outline drawing, see Q64.10x10H.
Q64.10x10H
64 LEAD THIN PLASTIC QUAD FLATPACK PACKAGE WITH EXPOSED PAD (EP-TQFP)
Rev 0, 4/15
12.00
D3
45
10.00
5.95 ±0.10
3A
0.50
B _12.00
3
0.3M9A4X
45
5.95 ±0.10 10.00
4X 0.20 C A-B D
TOP VIEW
4X 0.20 H A-B D
BOTTOM VIEW
EXPOSED PAD
11/13°
0.05
1.20 MAX
/ / 0.10 C
C 0.08
SEE DETAIL "A"
0.22 ±0.05
0.09/0.20
0.20 ±0.03
7
0.08 M C A-B D
WITH LEAD FINISH
0.09/0.16
BASE METAL
(10.00)
(0.28) TYP
10.00
(5.95)
(1.50) TYP
(5.95)
RECOMMENDED LAND PATTERN
VALUE FOR THETA
THETA 1 = 0°
THETA 2 = 11/13°
THETA 3 = 11/13°
2
1.2 MAX ^{1.0 ±0.05}
2
1
MIN 0.08
0.08/0.2
0.1 ±0.05
3
0.2
DETAIL "A"
SCALE: NONE
1.00
REF
0.25
0.6 ±0.15
NOTES:
1. All dimensioning and tolerancing conform to ANSI Y14.5-1982.
2. Datum plane H located at mold parting line and coincident
with lead, where lead exits plastic body at bottom of parting line.
3. Datums A-B and D to be determined at centerline between
leads where leads exit plastic body at datum plane H.
4. Dimensions do not include mold protrusion. Allowable mold
protrusion is 0.25mm. per side.
5. These dimensions to be determined at datum plane H.
6. Package top dimensions are smaller than bottom dimensions
and top of package will not overhang bottom of package.
7.
Dimension b does not include dam bar protrusion. Allowable dam bar
protrusion shall not cause the lead width to exceed the b dimension
by more than 0.08mm. Dam bar cannot be located on the lower radius
or the foot. Minimum space between protrusion and an adjacent lead
is 0.07mm.
Exact shape of each corner is optional.
8. Controlling dimension: millimeter.
9. This outline conforms to JEDEC publication 95 registration
MS-026, variation ACD.
10. Dimensions in ( ) are for reference only.
Submit Document Feedback ₉₄
FN8887.0
November 7, 2016