82845PE Datasheet, PDF (33/176 Pages) Intel Corporation – 82845GE Graphics and Memory Controller Hub (GMCH) and 82845PE Memory Controller Hub (MCH)

Signal Description
2.6
Analog Display (Intel^® 82845GE only)
Signal Name
HSYNC
VSYNC
RED
RED#
GREEN
GREEN#
BLUE
BLUE#
REFSET
DDCA_CLK
DDCA_DATA
Type
Description
O
3.3 V
GPIO
O
3.3 V
GPIO
O
Analog
O
Analog
O
Analog
O
Analog
O
Analog
O
Analog
I
Analog
I/O
3.3 V
GPIO
I/O
3.3 V
GPIO
CRT Horizontal Synchronization: This signal is used as the horizontal sync
(polarity is programmable) or “sync interval”.
CRT Vertical Synchronization: This signal is used as the vertical sync (polarity
is programmable).
RED Analog Video Output: This signal is a CRT Analog video output from the
internal color palette DAC. The DAC is designed for a 37.5 Ω equivalent load on
each signal (e.g., 75 Ω resistor on the board, in parallel with a 75 Ω CRT load).
RED# Analog Output: This signal is a truly differential analog video output from
the internal color palette DAC. Refer to the Intel^® Pentium^® 4 Processor in 478-
Pin Package and Intel^® 845GE/845PE Chipset Platform Design Guide for
routing recommendations. This signal is used to provide noise immunity.
GREEN Analog Video Output: This signal is a CRT Analog video output from
the internal color palette DAC. The DAC is designed for a 37.5 Ω equivalent
load on each signal (e.g., 75 Ω resistor on the board, in parallel with a 75 Ω CRT
load).
GREEN# Analog Output: This signal is a truly differential analog video output
from the internal color palette DAC. Refer to the Intel^® Pentium^® 4 Processor in
478-Pin Package and Intel^® 845GE/845PE Chipset Platform Design Guide for
routing recommendations. This signal is used to provide noise immunity.
BLUE Analog Video Output: This signal is a CRT Analog video output from
the internal color palette DAC. The DAC is designed for a 37.5 Ω equivalent
load on each signal (e.g., 75 Ω resistor on the board, in parallel with a 75 Ω CRT
load).
BLUE# Analog Output: This signal is a truly differential analog video output
from the internal color palette DAC. Refer to the Intel^® Pentium^® 4 Processor in
478-Pin Package and Intel^® 845GE/845PE Chipset Platform Design Guide for
routing recommendations. This signal is used to provide noise immunity.
Resistor Set: Set point resistor for the internal color palette DAC. A 137 Ω, 1%
resistor is required between REFSET and GND.
Analog DDC Clock: Clock signal for the I²C style interface that connects to
Analog CRT Display.
NOTE: This signal may need to be level shifted to 5 V.
Analog DDC Data: Data signal for the I²C style interface that connects to
Analog CRT Display.
NOTE: This signal may need to be level shifted to 5 V.
Intel^® 82845GE/82845PE Datasheet
33