82845PE Datasheet, PDF (151/176 Pages) Intel Corporation – 82845GE Graphics and Memory Controller Hub (GMCH) and 82845PE Memory Controller Hub (MCH)

Ballout and Package Information
Ballout and Package Information
7
This chapter provides the ballout listing and the package dimensions for the 82845GE GMCH and
82845PE MCH.
7.1
Intel^® 82845GE GMCH / 82845PE MCH Ballouts
Figure 7-1 and Figure 7-2 show the (G)MCH footprint with the ball names listed for each ball.
Table 7-1 lists the ballout organized by ball number. Table 7-2 lists the ballout organized
alphabetically by signal name.
The following notes apply to the ballout:
Note: 82845GE Only. For the multiplexed AGP and DVO signals, only the AGP signal names are listed
in this chapter. Refer to Section 2.5.1 for the DVO-to-AGP signal mapping.
Note: Signal names marked with an “*” are 82845GE signals only. For 82845PE designs, refer to the
Intel^® Pentium^® 4 Processor in 478-Pin Package and Intel^® 845GE/845PE Chipset Platform
Design Guide for guidelines concerning the associated package ball.
Note: NC = No Connect.
Note: RSVD = These pins should not be connected and should be allowed to float.
Intel^® 82845GE/82845PE Datasheet
151