W79E217A Datasheet, PDF (61/207 Pages) Winbond – 8-bit Microcontroller

Preliminary W79E217A Data Sheet
PWM DEAD-TIME CONTROL REGISTER 1
Bit:
7
6
5
4
PDTC1.7 PDTC1.6 PDTC1.5 PDTC1.4
Mnemonic: PDTC1
3
PDTC1.3
2
PDTC1.2
1
0
PDTC1.1 PDTC1.0
Address: E5h
BIT NAME
7-6 PDTC1
5-0 PDTC1
FUNCTION
Dead-time clock frequency (FDT) prescaler select bits.
PDTC1.7
0
0
1
1
PDTC1.6
0
1
0
1
FDT
FOSC/2
FOSC/4
FOSC/8
FOSC/16
Dead time counter. Unsigned 6 bit dead time value bits for Dead Time Unit.
Dead-time = FDT * (PDTC1 [5:0]+1)
PWM DEAD-TIME CONTROL REGISTER 0
Bit:
7
6
5
4
3
2
1
0
PDTC0.7 PDTC0.6 PDTC0.5 PDTC0.4 PDTC0.3 PDTC0.2 PDTC0.1 PDTC0.0
Mnemonic: PDTC0
Address: E6h
BIT NAME
FUNCTION
7-4 PDTC0
Control complementary PWM to delay a dead-time at every rising edge or falling
edge. Reset value = 0.
1 = Dead-time is inserted at falling edge.
0 = Dead-time is inserted at rising edge.
PDTC0.4 - controls the pair of (PWM0, PWM1).
PDTC0.5 - controls the pair of (PWM2, PWM3).
PDTC0.6 - controls the pair of (PWM4, PWM5).
PDTC0.7 - controls the pair of (PWM6, PWM7).
3-0 PDTC0
Enable dead-time insertion; Dead-time insertion is only active when the pair of
complementary PWM is enabled. Reset value=0. If dead-time insertion is
inactive, the outputs of pin pair are complementary without any delay.
1 = Programmable dead-time is inserted into the pair signals of comparator output
to delay the pair signals change from low to high.
0 = Disable dead-time insertion.
PDTC0.0 - enables the dead-time insertion on the pin pair (PWM0, PWM1).
PDTC0.1 - enables the dead-time insertion on the pin pair (PWM2, PWM3).
PDTC0.2 - enables the dead-time insertion on the pin pair (PWM4, PWM5).
PDTC0.3 - enables the dead-time insertion on the pin pair (PWM6, PWM7).
PWM CONTROL REGISTER 4
Bit:
7
6
5
4
3
PWMEOM PWMOOM PWM6OM PWM7OM
-
Mnemonic: PWMCON4
2
-
1
0
-
BKF
Address: E7h
- 61 -
Publication Release Date: December 14, 2007
Revision A3.0