W79E217A Datasheet, PDF (40/207 Pages) Winbond – 8-bit Microcontroller

Preliminary W79E217A Data Sheet
BIT NAME
7-
6 WFWIN
5 NOE
4 NCE
3-0 CTRL
FUNCTION
Reserved.
On-chip FLASH EPROM bank select for in-system programming.
0= AP FLASH EPROM bank is selected as destination for re-programming.
1= LD FLASH EPROM bank is selected as destination for re-programming.
Flash EPROM output enable.
Flash EPROM chip enable.
The Flash Control Signals.
ISP MODE
WFWIN NOE
Erase 4KB LD Flash
1
1
Erase 64K AP Flash0
0
1
Program 4KB LD Flash
1
1
Program 64KB AP Flash0
0
1
Read 4KB LD Flash
1
0
Read 64KB AP Flash0
0
0
NCE
0
0
0
0
0
0
CTRL[3:0]
0010
0010
0001
0001
0000
0000
SFRAH,
SFRAL
X
X
Address in
Address in
Address in
Address in
SFRFD
X
X
Data in
Data in
Data out
Data out
PORT 3
Bit:
7
P3.7
Mnemonic: P3
BIT NAME
7-0 P3
6
5
4
3
2
1
0
P3.6
P3.5
P3.4
P3.3
P3.2
P3.1
P3.0
Address: B0h
FUNCTION
General purpose I/O port. Each pin also has an alternate input or output function
that is controlled by other SFRs. The alternate function is enabled if the
corresponding port latch bit is set to 1.
P3.7
P3.6
P3.5
P3.4
P3.3
P3.2
P3.1
P3.0
ALTERNATE FUNCTION
RD Strobe for read from external RAM.
WR Strobe for write to external RAM.
T1/IC1/QEB; Timer/counter 1 external count input/Input Capture 1/QEI input B.
T0/IC0/QEA; Timer/counter 0 external count input/Input Capture 0/QEI input A.
INT0 External interrupt 1.
INT1 External interrupt 0.
TxD Serial port output.
RxD Serial port input.
- 40 -
Publication Release Date: December 14, 2007
Revision A3.0