TA1360ANG Datasheet, PDF (98/108 Pages) Toshiba Semiconductor – TOSHIBA Bipolar Linear Integrated Circuit Silicon Monolithic

TA1360ANG
Note Characteristics
Test Conditions
HA09 Black peak detection 1. Set subaddress (00) data to 40H.
pulse phase and
level
2. Set SW2 to C, SW3 to C, and SW24A to OPEN
3. Input signal C (as the figure shown below) to #24 (FBP input).
4. Measure #2 (BPH filter) black peak detection pulse phase (HBP_S00a and HBP_S00b) in relation
to signal C.
5. Set HBP-PHS 1/2 to (01), (10), and (11). Measure black peak detection pulse phase.
Signal C
HBP_S**a
31.5 µs
4.13 µs
2V
0V
HBP_S**b
#2 waveform
HA10 FBP input threshold
1. Set subaddress (00) data to 40H.
2. Input signal B (as shown in the figure below) to TP16.
3. Increase amplitude of FBP signal to be input to #24 (FBP input) from 0 Vp-p. When #26
(H-OUT) phase locks with that of signal B, measure #24 input amplitude V_thFBP.
31.75 µs
2.35 µs
1.5 V
98
2003-01-21