TA1360ANG Datasheet, PDF (7/108 Pages) Toshiba Semiconductor – TOSHIBA Bipolar Linear Integrated Circuit Silicon Monolithic

Pin
No.
Pin Name
Function
Interface Circuit
22 H-FREQ SW2
Switches horizontal frequency
(Switch 2).
Leave this pin open when
horizontal frequency is switched
by Bus controlling. Controlling this
pin prevails over Bus control.
(Refer to Table 1: Bus control
function.)
22
When this IC is used for CRT,
frequency of horizontal output (pin
26) is controlled according to
voltage of this pin. DC voltage that
is generated by dividing resistor of
DEF V_CC (pin 19) should be used
to control this pin.
1 kΩ
30 kΩ
TA1360ANG
Input Signal/Output Signal
19
7.5 V
4.5 V
1.5 V
At BUS control (horizontal
frequency) : output voltage value
28 k/15 kHz : DC 9 V
31 kHz
: DC 6 V
33 kHz
: DC 3 V
37 k/45 kHz : DC 0 V
At pin 22 control, horizontal
frequency and input voltage value
0 to 1.0 V : 37 k/45 kHz
2.0 V to 4.0 V : 33 kHz
5.0 V to 7.0 V : 31 kHz
8.0 V to 9.0 V : 28 k/15 kHz
25
23
H CURVE
CORRECTION
Adjusts screen curve at high
voltage fluctuation. Input AC
component of high voltage
fluctuation.
When not used, connect 0.01-µF
capacitor between this pin and
GND.
1 kΩ
23
19
DC
6.5 V
25
24 FBP IN
Inputs FBP for horizontal AFC.
Sets H-BLK width.
25 DEF/DAC GND GND pin for DEF/DAC block
26 H-OUT
Horizontal output pin.
Open-collector output.
24 _{500 Ω}
20 kΩ

5 kΩ
26
19
25
19
max: 9 V
H-AFC threshold
: 5.3 V
BLK threshold
: 2.3 V

25
27 VP OUT
Outputs vertical pulse.
Applying current to this pin,
performs external blanking by
OR-ing with internal blanking.
Note: Changing H-position varies
VP output width. Use the
start phase only for VP
output.
200 Ω
27
19
VP output:
5V
0V
32
Start phase
25
V-BLK input current: 780 µA to 1 mA
7
2003-01-21