TA1360ANG Datasheet, PDF (5/108 Pages) Toshiba Semiconductor – TOSHIBA Bipolar Linear Integrated Circuit Silicon Monolithic

Pin
No.
Pin Name
Function
Interface Circuit
8 Y2 IN
Inputs Y2 signal via clamp
8
capacitor.
9
10
9 C_b2/P_b2 IN
10 C_r2/P_r2 IN
Inputs C_b2/P_b2 signal via clamp
capacitor.
Inputs C_r2/P_r2 signal via clamp
capacitor.
1 kΩ
1 kΩ
5 kΩ
11
COLOR LIMITER
Connects filter for detecting color
limit.
11
5 kΩ
40
6
40
TA1360ANG
Input Signal/Output Signal
1 Vp-p (including sync) at 100%
color bar
or
700 mVp-p at 100% color bar for
C_b1/P_b1
700 mVp-p700 mVp-p at 100% color
bar for C_r1/P_r1
DC
6
12 VSM FILTER
Connects VSM output filter.
Connect 0.01-µF capacitor
between this pin and GND.
13 H-FREQ SW1
Switches horizontal frequency
(Switch 1).
Leave this pin open when
horizontal frequency is switched
by Bus controlling.
Controlling this pin prevails over
Bus control. (Refer to Table 1:
Bus control function.)
When this IC is used for CRT,
connect this pin to DEF V_CC (pin
19) or DEF GND (pin 25). If it is
not necessary to control this pin
on CRT, connect this pin directly
to DEF VCC or DEF GND on the
PCB.
14 SYNC IN
Inputs Y signal with sync signal
via clamp capacitor.
40
12
200 Ω
54
6
19
1 kΩ
13
25
19
1 kΩ
14
1 kΩ
DC
DEF V_CC or DEF GND
White 100%: 1 V_p-p
or
25
5
2003-01-21