MSP432P401R Datasheet, PDF (40/157 Pages) Texas Instruments – Mixed-Signal Microcontrollers

MSP432P401R, MSP432P401M
SLAS826B – MARCH 2015 – REVISED FEBRUARY 2016
www.ti.com
PSS, SVSMH (continued)
over recommended ranges of supply voltage and operating free-air temperature (unless otherwise noted)
PARAMETER
TEST CONDITIONS
MIN
TYP MAX UNIT
V_SVSMH-,LP
V_{SVSMH_hys}
t_PD,SVSMH
t_(SVSMH)
SVSM_H threshold level; Low
Power Mode [falling DV_CC]
SVSM_H hysteresis
SVS_H propagation delay, high-
performance mode
SVS_H propagation delay, low-
power mode
SVSM_H on or off delay time
SVSMHOFF = 0, SVSMHLP = 1, SVSMHTH = 0,
DC (dDV_CC/dt < 1V/s) trimmed
SVSMHOFF = 0, SVSMHLP = 1, SVSMHTH = 1,
DC (dDV_CC/dt < 1V/s) trimmed
SVSMHOFF = 0, SVSMHLP = 1, SVSMHTH = 2,
DC (dDV_CC/dt < 1V/s) trimmed
SVSMHOFF = 0, SVSMHLP = 1, SVSMHTH = 3,
DC (dDV_CC/dt < 1V/s) trimmed
SVSMHOFF = 0, SVSMHLP = 1, SVSMHTH = 4,
DC (dDV_CC/dt < 1V/s) trimmed
SVSMHOFF = 0, SVSMHLP = 1, SVSMHTH = 5,
DC (dDV_CC/dt < 1V/s) trimmed
SVSMHOFF = 0, SVSMHLP = 1, SVSMHTH = 6,
DC (dDV_CC/dt < 1V/s) trimmed
SVSMHOFF = 0, SVSMHLP = 1, SVSMHTH = 7,
DC (dDV_CC/dt < 1V/s) trimmed
SVSMHOFF = 0, SVSMHLP = 0, very fast
dV_DVCC/dt
SVSMHOFF = 0, SVSMHLP = 1, very fast
dV_DVCC/dt
SVSMHOFF = 1 → 0
SVSMHLP = 0 ⁽¹⁾
1.47
1.5
1.55
2
2.2
2.4
2.7
2.87
1.54 1.62
1.57 1.65
1.62 1.71
2.09 2.18
V
2.3
2.4
2.51 2.62
2.82 2.94
3.0 3.13
15
mV
2
10
μs
15
100
17
40 μs
(1) If the SVSMH is kept disabled in active mode and is enabled before entering a low-power mode of the device (LPM3, LPM4, LPM3.5, or
LPM4.5) care should be taken that sufficient time has elapsed since enabling of the module before entry into the device low-power
mode to allow for successful wakeup of SVSMH module as per the SVSMH on or off delay time specification. Otherwise, SVSMH may
trip, causing device to get a Reset & wakeup from the Low Power Mode.
40
Specifications
Copyright © 2015–2016, Texas Instruments Incorporated
Submit Documentation Feedback
Product Folder Links: MSP432P401R MSP432P401M