MC9S08GB60 Datasheet, PDF (76/290 Pages) Motorola, Inc – Microcontrollers

Chapter 5 Resets, Interrupts, and System Configuration
LVDV — Low-Voltage Detect Voltage Select
The LVDV bit selects the LVD trip point voltage (V_LVD).
1 = High trip point selected (V_LVD = V_LVDH).
0 = Low trip point selected (V_LVD = V_LVDL).
LVWV — Low-Voltage Warning Voltage Select
The LVWV bit selects the LVW trip point voltage (V_LVW).
1 = High trip point selected (V_LVW = V_LVWH).
0 = Low trip point selected (V_LVW = V_LVWL).
PPDF — Partial Power Down Flag
The PPDF bit indicates that the MCU has exited the stop2 mode.
1 = Stop2 mode recovery.
0 = Not stop2 mode recovery.
PPDACK — Partial Power Down Acknowledge
Writing a 1 to PPDACK clears the PPDF bit.
PDC — Power Down Control
The write-once PDC bit controls entry into the power down (stop2 and stop1) modes.
1 = Power down modes are enabled.
0 = Power down modes are disabled.
PPDC — Partial Power Down Control
The write-once PPDC bit controls which power down mode, stop1 or stop2, is selected.
1 = Stop2, partial power down, mode enabled if PDC set.
0 = Stop1, full power down, mode enabled if PDC set.
MC9S08GB/GT Data Sheet, Rev. 2.3
76
Freescale Semiconductor