MC9S08GB60 Datasheet, PDF (266/290 Pages) Motorola, Inc – Microcontrollers

Appendix A Electrical Characteristics
Table A-5. Supply Current Characteristics (continued)
Parameter
Symbol V_DD (V)
Typical¹
Max²
Temp. (°C)
LVI adder to stop3
(LVDSE = LVDE = 1)
55
3
70 µA
70
85
55
2
60 µA
70
85
1 _{Typicals are measured at 25°C. See Figure A-6 through Figure A-9 for typical curves across voltage/temperature.}
2 _{Values given here are preliminary estimates prior to completing characterization.}
3 _{All modules except ATD active, ICG configured for FBE, and does not include any dc loads on port pins}
4 _{Values are characterized but not tested on every part.}
5 _{Every unit tested to this parameter. All other values in the Max column are guaranteed by characterization.}
6 _{Most customers are expected to find that auto-wakeup from stop2 or stop3 can be used instead of the higher current wait mode.}
Wait mode typical is 560 µA at 3 V and 422 µA at 2V with f_Bus = 1 MHz.
18
16
14
12
20 MHz, ATD_off, FEE, 25°C
10
20 MHz, ATD_off, FBE, 25°C
8 MHz, ATD_off, FEE, 25°C
8
8 MHz, ATD_off, FBE, 25°C
6
1 MHz, ATD_off, FEE, 25°C
1 MHz, ATD_off, FBE, 25°C
4
2
0
1.6 1.8 2.0 2.2 2.4 2.6 2.8 3.0 3.2 3.4 3.8
V_DD (Vdc)
Figure A-6. Typical Run I_DD for FBE and FEE Modes, I_DD vs V_DD
MC9S08GB/GT Data Sheet, Rev. 2.3
266
Freescale Semiconductor