MC9S08GB60 Datasheet, PDF (262/290 Pages) Motorola, Inc – Microcontrollers

Appendix A Electrical Characteristics
Table A-4. DC Characteristics (Sheet 2 of 2)
(Temperature Range = –40 to 85°C Ambient)
Parameter
Symbol
Min
Typical¹
Power on reset (POR) re-arm voltage⁽²⁾
Mode = stop
Mode = run and Wait
Input high voltage (V_DD > 2.3 V) (all digital inputs)
Input high voltage (1.8 V ≤ V_DD ≤ 2.3 V)
(all digital inputs)
V_Rearm
V_IH
V_IH
0.20
0.50
0.70 ×
V_DD
0.85 ×
V_DD
0.30
0.80
Input low voltage (V_DD > 2.3 V) (all digital inputs)
V_IL
—
Input low voltage (1.8 V ≤ V_DD ≤ 2.3 V)
(all digital inputs)
Input hysteresis (all digital inputs)
Input leakage current (per pin)
V_In = V_DD or V_SS, all input only pins
High impedance (off-state) leakage current (per pin)
V_In = V_DD or V_SS, all input/output
Internal pullup and pulldown resistors³
(all port pins and IRQ)
Internal pulldown resistors (Port A4–A7 and IRQ)
Output high voltage (V_DD ≥ 1.8 V)
I_OH = –2 mA (ports A, B, D, E, and G)
Output high voltage (ports C and F)
I_OH = –10 mA (V_DD ≥ 2.7 V)
I_OH = –6 mA (V_DD ≥ 2.3 V)
I_OH = –3 mA (V_DD ≥ 1.8 V)
Maximum total I_OH for all port pins
Output low voltage (V_DD ≥ 1.8 V)
I_OL = 2.0 mA (ports A, B, D, E, and G)
Output low voltage (ports C and F)
I_OL = 10.0 mA (V_DD ≥ 2.7 V)
I_OL = 6 mA (V_DD ≥ 2.3 V)
I_OL = 3 mA (V_DD ≥ 1.8 V)
Maximum total I_OL for all port pins
dc injection current^{4, 5, 6, 7, 8}
V_IN < V_SS , V_IN > V_DD
Single pin limit
Total MCU limit, includes sum of all stressed pins
Input capacitance (all non-supply pins)⁽²⁾
V_IL
V_hys
|I_In|
|I_OZ|
R_PU
R_PD
V_OH
—
0.06 ×
V_DD
—
—
17.5
17.5
V_DD – 0.5
V_DD – 0.5
|I_OHT|
—
—
V_OL
—
—
—
I_OLT
—
|I_IC|
—
—
C_In
—
0.025
0.025
Max
Unit
0.40
V
1.2
—
V
—
V
0.35 ×
V_DD
V
0.30 ×
V_DD
V
—
V
1.0
µA
1.0
µA
52.5
kW
52.5
kW
—
—
V
—
—
60
mA
0.5
0.5
V
0.5
0.5
60
mA
0.2
mA
5
mA
7
pF
MC9S08GB/GT Data Sheet, Rev. 2.3
262
Freescale Semiconductor