MC9S08GB60 Datasheet, PDF (4/290 Pages) Motorola, Inc – Microcontrollers

Revision History
To provide the most up-to-date information, the revision of our documents on the World Wide Web will
be the most current. Your printed copy may be an earlier revision. To verify you have the latest information
available, refer to:
http://freescale.com
The following revision history table summarizes changes contained in this document.
Revision
Number
1.0
1.1
1.2
1.3
1.4
1.5
2
2.2
2.3
Revision
Date
4/25/2003
10/2/2003
10/29/2003
11/12/2003
2/10/2004
9/2/2004
12/01/2004
Description of Changes
Initial release
Electricals change, appendix A only
Electricals change, appendix A only
Added module version table; clarifications
Fixed typos and made corrections and clarifications
Added 1-MHz I_DD values to Electricals, appendix A
Changed format of register names to enable reuse of code (from SCIBD to SCI1BD, even when
only one instance of a module on a chip)
Added new device: MC9S08GT16 to book. Added new 48-pin QFN package to book. BKGDPE
description in Section 5 — changed PTD0 to PTG0. Changed typo in CPU section that listed
MOV instruction as being 6 cycles instead of 5 (Table 8-2).
Format to Freescale look-and-feel; Clarified RTI clock sources and other changes in Chapter 5;
updated ICG initialization examples; expanded descriptions of LOLS and LOCS bits in ICGS1;
updated ICG electricals Table A-9 and added a figure
Minor changes to Table 7-4, Table 7-5, Table A-9;
Clarifications in Section 11.10.6, “SCI x Control Register 3 (SCIxC3)”, Section 11.7, “Interrupts
and Status Flags”, Section 11.8.1, “8- and 9-Bit Data Modes”, PTG availability in 48-pin
package (see Table 2-2)
This product incorporates SuperFlash^® technology licensed from SST.
Freescale‚ and the Freescale logo are trademarks of Freescale Semiconductor, Inc.
© Freescale Semiconductor, Inc., 2004. All rights reserved.
MC9S08GB/GT Data Sheet, Rev. 2.3
4
Freescale Semiconductor