MC9S12E128CFUE Datasheet, PDF (69/606 Pages) Freescale Semiconductor, Inc – MC9S12E128 Data Sheet

Chapter 1 MC9S12E128 Device Overview (MC9S12E128DGV1)
PIM_9E128 block description chapter and the DAC_8B1C block description chapter for information about
pin configurations.
1.4.26 PM0 / DAO2 — Port M I/O Pin 0
PM0 is a general purpose input or output pin. When the Digital to Analog module 2 (DAC2) is enabled the
PM0 pin is configured as the analog output DA02 of DAC2. While in reset and immediately out of reset
the PM0 pin is configured as a high impedance input pin. Consult the Port Integration Module (PIM)
PIM_9E128 block description chapter and the DAC_8B1C block description chapter for information about
pin configurations.
1.4.27 PP[5:0] / PW0[5:0] — Port P I/O Pins [5:0]
PP[5:0] are general purpose input or output pins. When the Pulse width Modulator with Fault protection
(PMF) is enabled the PP[5:0] output pins, as a whole or as pairs, can be configured as PW0[5:0] outputs.
While in reset and immediately out of reset the PP[5:0] pins are configured as a high impedance input pins.
Consult the Port Integration Module (PIM) PIM_9E128 block description chapter and the PMF_15B6C
block description chapter for information about pin configurations.
1.4.28 PQ[6:4] / IS[2:0] — Port Q I/O Pins [6:4]
PQ[6:4] are general purpose input or output pins. When enabled in the Pulse width Modulator with Fault
protection module (PMF), the PQ[6:4] pins become the current status input pins, IS[2:0], for top/bottom
pulse width correction. While in reset and immediately out of reset PP[5:0] pins are configured as a high
impedance input pins. Consult the Port Integration Module (PIM) PIM_9E128 block description chapter
and the PMF_15B6C block description chapter for information about pin configurations.
1.4.29 PQ[3:0] / FAULT[3:0] — Port Q I/O Pins [3:0]
PQ[3:0] are general purpose input or output pins. When enabled in the Pulse width Modulator with Fault
protection module (PMF), the PQ[3:0] pins become the Fault protection inputs pins, FAULT[3:0], of the
PMF. While in reset and immediately out of reset the PQ[3:0] pins are configured as a high impedance
input pins. Consult the Port Integration Module (PIM) PIM_9E128 block description chapter and the
PMF_15B6C block description chapter for information about pin configurations.
1.4.30 PS7 / SS — Port S I/O Pin 7
PS7 is a general purpose input or output. When the Serial Peripheral Interface (SPI) is enabled PS7
becomes the slave select pin SS. While in reset and immediately out of reset the PS7 pin is configured as
a high impedance input pin. Consult the Port Integration Module (PIM) PIM_9E128 block description
chapter and the SPI block description chapter for information about pin configurations.
MC9S12E128 Data Sheet, Rev. 1.07
Freescale Semiconductor
69