|
MC9S12E128CFUE Datasheet, PDF (239/606 Pages) Freescale Semiconductor, Inc – MC9S12E128 Data Sheet | |||
|
◁ |
Chapter 7 Digital-to-Analog Converter (DAC8B1CV1)
7.2.1 DAO â DAC Channel Output
This pin is used as the analog output pin of the DAC8B1C module. The value represents the analog voltage
level between VSSA and VREF.
7.2.2 VDDA â DAC Power Supply
This pin serves as the power supply pin.l
7.2.3 VSSA â DAC Ground Supply
This pin serves as an analog ground reference to the DAC.
7.2.4 VREF â DAC Reference Supply
This pin serves as the source for the high reference potential. Separation from the power supply pins
accommodates the ï¬ltering necessary to achieve the accuracy of which the system is capable.
7.2.5 VRL â DAC Reference Ground Supply
This pin serves as the ground for the low reference potential. This pin is connected to VSSA outside the
DAC module boundary to accommodate the ï¬ltering necessary to achieve the accuracy of which the
system is capable.
7.3 Memory Map and Registers
This section provides a detailed description of all memory and registers accessible to the end user.
7.3.1 Module Memory Map
Figure 7-2 summarizes the DAC8B1C memory map. The base address is deï¬ned at the chip level and the
address offset is deï¬ned at the module level.
Address
Name
Bit 7
0x0000
DACC0
R
DACE
W
0x0001
R
0
DACC1
W
0x0002
DACD (Left
Justiï¬ed)
R
W
BIT 7
0x0003
DACD (Right R
Justiï¬ed) W
BIT 7
6
DACTE
0
BIT 6
BIT 6
5
0
0
BIT 5
BIT 5
4
0
0
BIT 4
BIT 4
3
DJM
0
BIT 3
BIT 3
= Unimplemented or Reserved
Figure 7-2. DAC8B1C Register Summary
2
DSGN
0
1
DACWAI
0
Bit 0
DACOE
0
BIT 2
BIT 2
BIT 1
BIT 1
BIT 0
BIT 0
MC9S12E128 Data Sheet, Rev. 1.07
Freescale Semiconductor
239
|
▷ |