English
Language : 

MC68HC705JJ7 Datasheet, PDF (139/164 Pages) Freescale Semiconductor, Inc – Microcontrollers
Chapter 15
Electrical Specifications
15.1 Introduction
This section contains the electrical and timing specifications.
15.2 Maximum Ratings
Maximum ratings are the extreme limits to which the MCU can be exposed without permanently damaging
it.
The MCU contains circuitry to protect the inputs against damage from high static voltages; however, do
not apply voltages higher than those shown in the table below. Keep VIn and VOut within the range
VSS ≤ (VIn or VOut) ≤ VDD. Connect unused inputs to the appropriate voltage level, either VSS or VDD.
Rating
Supply voltage
Bootloader/self-check mode (IRQ/VPP pin only)
Current drain per pin excluding VDD and VSS
Operating junction temperature
Storage temperature range
Symbol
VDD
VIn
I
TJ
Tstg
Value
Unit
–0.3 to +7.0
V
VSS –0.3 to 17
V
25
mA
+150
°C
–65 to +150
°C
NOTE
This device is not guaranteed to operate properly at the maximum ratings.
Refer to 15.7 DC Electrical Characteristics (5.0 Vdc) and 15.8 DC Electrical
Characteristics (3.0 Vdc) for guaranteed operating conditions.
15.3 Operating Temperature Range
Characteristic
Operating temperature range
Extended
Symbol
TA
Value
Unit
TL to TH
°C
–40 to +85
15.4 Thermal Characteristics
Thermal resistance
Plastic DIP
SOIC
Characteristic
Symbol
θJA
Value
60
Unit
°C/W
MC68HC705JJ7 • MC68HC705JP7 Advance Information Data Sheet, Rev. 4.1
Freescale Semiconductor
139