SM320C6414-EP_16 Datasheet, PDF (44/93 Pages) Texas Instruments – FIXED-POINT DIGITAL SIGNAL PROCESSORS

SM320C6414-EP, SM320C6415-EP, SM320C6416-EP
FIXED-POINT DIGITAL SIGNAL PROCESSORS
SGUS043D – MAY 2003 – REVISED SEPTEMBER 2008
www.ti.com
TI device nomenclature also includes a suffix with the device family name. This suffix indicates the
package type (for example, GLZ), the temperature range (for example, blank is the default commercial
temperature range), and the device speed range in megahertz. Figure 3-1 provides a legend for reading
the complete device name for any SM320C64x. DSP generation member.
SM 32 C 6414 D
PREFIX
TMX =
TMP =
TMS =
SMX =
SMJ =
SM =
Experimental device
Prototype device
Qualified device
Experimental device, MIL
MIL-PRF-38535, QML
Commercial processing
DEVICE FAMILY
3 or 32 or 320 = TMS320 DSP
family
TECHNOLOGY
C = CMOS
GLZ 50 A EP
ENHANCED PLASTIC INDICATOR
TEMPERATURE RANGE (DEFAULT: 0°C TO 90°C)^†
Blank = 0°C to 90°C, commercial temperature
A = -40°C to 105 °C, extended temperature ^‡
S ^{= -55°C to 105°C,} e xtended temperature ^‡
DEVICE SPEED RANGE
50 (500-MHz CPU, 100-MHz EMIF)
PACKAGE TYPE ^§
GLZ = 532-pin plastic BGA
REV LETTER
DEVICE^¶
C64x DSP:
6414,
6415,
6416
† _{See the Recommended Operating Conditions section of this data sheet for more details.}
‡ _{The extended temperature “A or S version” devices may have different operating conditions than the commercial temperature devices.}
See the Recommended Operating Conditions section of this data sheet for more details.
§ _{BGA = Ball Grid Array}
¶
Figure 3-1. TMS320C64xE DSP Device Nomenclature (Including C6414, C6415, and C6416 Devices)
3.1.1 Documentation Support
Extensive documentation supports all TMS320 DSP family generations of devices from product
announcement through applications development. The types of documentation available include: data
sheets, such as this document, with design specifications; complete user's reference guides for all devices
and tools; technical briefs; development-support tools; on-line help; and hardware and software
applications. The following is a brief, descriptive list of support documentation specific to the C6000 DSP
devices.
The TMS320C6000 CPU and Instruction Set Reference Guide (SPRU189) describes the C6000E DSP
CPU (core) architecture, instruction set, pipeline, and associated interrupts.
The TMS320C6000 Peripherals Reference Guide (SPRU190) describes the functionality of the peripherals
available on the C6000E DSP platform of devices, such as the 64-/32-/16-bit external memory interfaces
(EMIFs), direct-memory-access (DMA), enhanced direct-memory-access (EDMA) controller, multichannel
buffered serial ports (McBSPs), an 8-bit Universal Test and Operations PHY Interface for ATM Slave
(UTOPIA Slave) port, 32-/16-bit host-port interfaces (HPIs), a peripheral component interconnect (PCI),
expansion bus (XB), peripheral component interconnect (PCI), clocking and phase-locked loop (PLL);
general-purpose timers, general-purpose input/output (GPIO) port, and power-down modes. This guide
also includes information on internal data and program memories.
The TMS320C6000 Technical Brief (SPRU197) gives an introduction to the TMS320C62xE/
TMS320C67xE devices, associated development tools, and third-party support.
44
Development Support
Submit Documentation Feedback