|
SM320C6414-EP_16 Datasheet, PDF (27/93 Pages) Texas Instruments – FIXED-POINT DIGITAL SIGNAL PROCESSORS | |||
|
◁ |
www.ti.com
CLKX1/URADDR4â
FSX1/UXADDR3â
DX1/UXADDR4â
CLKR1/URADDR2â
FSR1/UXADDR2â
DR1/UXADDR1â
CLKS1/URADDR3â
SM320C6414-EP, SM320C6415-EP, SM320C6416-EP
FIXED-POINT DIGITAL SIGNAL PROCESSORS
SGUS043D â MAY 2003 â REVISED SEPTEMBER 2008
McBSP1
Transmit
Receive
Clock
McBSP0
Transmit
Receive
Clock
CLKX0
FSX0
DX0
CLKR0
FSR0
DR0
CLKS0
CLKX2/XSP_CLKâ
FSX2
DX2/XSP_DOâ
CLKR2
FSR2
DR2/XSP_DIâ
CLKS2/GP8â¡
McBSP2
Transmit
Receive
Clock
McBSPs
(Multichannel Buffered
Serial Ports)
â For the C6415 and C6416 devices, these McBSP2 and McBSP1 pins are MUXed with the PCI and UTOPIA peripherals, respectively.
By default, these signals function as McBSP2 and McBSP1, respectively. For more details on these MUXed pins, see the Device
Configurations section of this data sheet.
For the C6414 device, these McBSP2 and McBSP1 peripheral pins are not MUXed; the C6414 device does not support PCI and UTOPIA
peripherals.
â¡ The McBSP2 clock source pin (CLKS2, default) is MUXed with the GP8 pin. To use this MUXed pin as the GP8 signal, the appropriate
GPIO register bits (GP8EN and GP8DIR) must be properly enabled and configured. For more details, see the Device Configurations
section of this data sheet.
Figure 1-5. Peripheral Signals (3)
Submit Documentation Feedback
Introduction
27
|
▷ |