English
Language : 

C8051F52X Datasheet, PDF (75/220 Pages) Silicon Laboratories – 8/4/2 kB ISP Flash MCU Family
C8051F52x-53x
9. CIP-51 Microcontroller
The MCU system controller core is the CIP-51 microcontroller. The CIP-51 is fully compatible with the
MCS-51™ instruction set. Standard 803x/805x assemblers and compilers can be used to develop soft-
ware. The C8051F52x/C8051F53x family has a superset of all the peripherals included with a standard
8051. See Section “1. System Overview” on page 17 for more information about the available peripherals.
The CIP-51 includes on-chip debug hardware which interfaces directly with the analog and digital sub-
systems, providing a complete data acquisition or control-system solution in a single integrated circuit.
The CIP-51 Microcontroller core implements the standard 8051 organization and peripherals as well as
additional custom peripherals and functions to extend its capability (see Figure 9.1 for a block diagram).
The CIP-51 core includes the following features:
- Fully Compatible with MCS-51 Instruction
Set
- 25 MIPS Peak Throughput
- 256 Bytes of Internal RAM
- Extended Interrupt Handler
- Reset Input
- Power Management Modes
- Integrated Debug Logic
- Program and Data Memory Security
DATA BUS
ACCUMULATOR
TMP1
TMP2
PSW
ALU
B REGISTER
STACK POINTER
SRAM
ADDRESS
REGISTER
SRAM
(256 X 8)
DATA BUS
BUFFER
D8
DATA POINTER
D8
PC INCREMENTER
SFR_ADDRESS
SFR
SFR_CONTROL
D8
BUS
SFR_WRITE_DATA
INTERFACE
SFR_READ_DATA
PROGRAM COUNTER (PC)
PRGM. ADDRESS REG.
RESET
CLOCK
CONTROL
LOGIC
PIPELINE
STOP
IDLE
POWER CONTROL
REGISTER
D8
D8
MEM_ADDRESS
MEM_CONTROL
MEMORY
A16
INTERFACE MEM_WRITE_DATA
MEM_READ_DATA
D8
INTERRUPT
INTERFACE
D8
SYSTEM_IRQs
EMULATION_IRQ
Figure 9.1. CIP-51 Block Diagram
Rev. 0.3
75