HD64336900G Datasheet, PDF (264/408 Pages) Renesas Technology Corp – 16-Bit Single-Chip Microcomputer H8 Family/H8/300H Tiny Series

Bit Bit Name Initial Value R/W Description
1 AAS
0
R/W Slave Address Recognition Flag
In slave receive mode, this flag is set to 1 if the first frame
following a start condition matches bits SVA6 to SVA0 in
SAR.
[Setting conditions]
• When the slave address is detected in slave receive
mode
• When the general call address is detected in slave
receive mode.
[Clearing condition]
• When 0 is written in AAS after reading AAS=1
0 ADZ
0
R/W General Call Address Recognition Flag
This bit is valid in I²C bus format slave receive mode.
[Setting condition]
• When the general call address is detected in slave
receive mode
[Clearing condition]
• When 0 is written in ADZ after reading ADZ=1
15.3.6 Slave Address Register (SAR)
SAR selects the communication format and sets the slave address. When the chip is in slave mode
with the I²C bus format, if the upper 7 bits of SAR match the upper 7 bits of the first frame
received after a start condition, the chip operates as the slave device.
Bit Bit Name Initial Value R/W Description
7 to 1 SVA6 to All 0
SVA0
R/W Slave Address 6 to 0
These bits set a unique address in bits SVA6 to SVA0,
differing form the addresses of other slave devices
connected to the I²C bus.
0
FS
0
R/W Format Select
0: I²C bus format is selected.
1: Clocked synchronous serial format is selected.
Rev. 1.00, 11/03, page 236 of 376