MC68HC08AB16A Datasheet, PDF (318/380 Pages) Motorola, Inc – HCMOS Microcontroller Unit

Freescale Semiconductor, Inc.
Input/Output (I/O) Ports
17.7 Port E
Port E is an 8-bit special function port that shares two of its pins with the
timer interface module (TIMA), two of its pins with the serial
communications interface module (SCI) and four of its pins with the
serial peripheral interface module (SPI).
17.7.1 Port E Data Register (PTE)
The port E data register contains a data latch for each of the eight port E
pins.
Address: $0008
Bit 7
6
5
4
3
2
1
Bit 0
Read:
PTE7
Write:
PTE6
PTE5
PTE4
PTE3
PTE2
PTE1
PTE0
Reset:
Unaffected by reset
Alternative Function: SPSCK MOSI MISO
SS TACH1 TACH0 RxD
TxD
Figure 17-15. Port E Data Register (PTE)
PTE[7:0] — Port E Data Bits
These read/write bits are software programmable. Data direction of
each port E pin is under the control of the corresponding bit in data
direction register E. Reset has no effect on port E data.
SPSCK — SPI Serial Clock
The PTE7/SPSCK pin is the serial clock input of a SPI slave module
and serial clock output of a SPI master modules. When the SPE bit is
clear, the PTE7/SPSCK pin is available for general-purpose I/O. See
16.14.1 SPI Control Register.
MOSI — Master Out/Slave In
The PTE6/MOSI pin is the master out/slave in terminal of the SPI
module. When the SPE bit is clear, the PTE6/MOSI pin is available for
general-purpose I /O. See 16.14.1 SPI Control Register.
Technical Data
318
MC68HC08AB16A — Rev. 2.0
Input/Output (I/O) Ports
For More Information On This Product,
Go to: www.freescale.com
MOTOROLA