PIC18F87J10 Datasheet, PDF (91/394 Pages) Microchip Technology – 64/80-Pin High-Performance, 1-Mbit Flash Microcontrollers with nanoWatt Technology

PIC18F87J10 FAMILY
7.6.1 16-BIT BYTE WRITE MODE
Figure 7-1 shows an example of 16-bit Byte Write
mode for PIC18F87J10 family devices. This mode is
used for two separate 8-bit memories connected for
16-bit operation. This generally includes basic EPROM
and Flash devices. It allows table writes to byte-wide
external memories.
During a TBLWT instruction cycle, the TABLAT data is
presented on the upper and lower bytes of the
AD15:AD0 bus. The appropriate WRH or WRL control
line is strobed on the LSb of the TBLPTR.
FIGURE 7-1:
16-BIT BYTE WRITE MODE EXAMPLE
D<7:0>
PIC18F8XJ10
AD<7:0>
AD<15:8>
ALE
A<19:16>⁽¹⁾
373
A<19:0>
D<15:8>
373
(MSB)
A<x:0>
D<7:0>
CE
OE WR⁽²⁾
(LSB)
A<x:0>
D<7:0>
D<7:0>
CE
OE WR⁽²⁾
CE
OE
WRH
WRL
Address Bus
Data Bus
Control Lines
Note 1: Upper order address lines are used only for 20-bit address widths.
2: This signal only applies to table writes. See Section 6.1 “Table Reads and Table Writes”.
 2005 Microchip Technology Inc.
Advance Information
DS39663A-page 89