PIC18F87J10 Datasheet, PDF (53/394 Pages) Microchip Technology – 64/80-Pin High-Performance, 1-Mbit Flash Microcontrollers with nanoWatt Technology

PIC18F87J10 FAMILY
TABLE 4-2: INITIALIZATION CONDITIONS FOR ALL REGISTERS (CONTINUED)
Register
Applicable Devices
Power-on Reset,
Brown-out Reset
MCLR Resets
WDT Reset
RESET Instruction
Stack Resets
Wake-up via WDT
or Interrupt
CCPR1H
PIC18F6XJ1X PIC18F8XJ1X xxxx xxxx
uuuu uuuu
uuuu uuuu
CCPR1L
PIC18F6XJ1X PIC18F8XJ1X xxxx xxxx
uuuu uuuu
uuuu uuuu
CCP1CON PIC18F6XJ1X PIC18F8XJ1X 0000 0000
0000 0000
uuuu uuuu
CCPR2H
PIC18F6XJ1X PIC18F8XJ1X xxxx xxxx
uuuu uuuu
uuuu uuuu
CCPR2L
PIC18F6XJ1X PIC18F8XJ1X xxxx xxxx
uuuu uuuu
uuuu uuuu
CCP2CON PIC18F6XJ1X PIC18F8XJ1X 0000 0000
0000 0000
uuuu uuuu
CCPR3H
PIC18F6XJ1X PIC18F8XJ1X xxxx xxxx
uuuu uuuu
uuuu uuuu
CCPR3L
PIC18F6XJ1X PIC18F8XJ1X xxxx xxxx
uuuu uuuu
uuuu uuuu
CCP3CON PIC18F6XJ1X PIC18F8XJ1X 0000 0000
0000 0000
uuuu uuuu
ECCP1AS
PIC18F6XJ1X PIC18F8XJ1X
0000 0000
0000 0000
uuuu uuuu
CVRCON
PIC18F6XJ1X PIC18F8XJ1X 0000 0000
0000 0000
uuuu uuuu
CMCON
PIC18F6XJ1X PIC18F8XJ1X 0000 0111
0000 0111
uuuu uuuu
TMR3H
PIC18F6XJ1X PIC18F8XJ1X xxxx xxxx
uuuu uuuu
uuuu uuuu
TMR3L
PIC18F6XJ1X PIC18F8XJ1X xxxx xxxx
uuuu uuuu
uuuu uuuu
T3CON
PIC18F6XJ1X PIC18F8XJ1X 0000 0000
uuuu uuuu
uuuu uuuu
PSPCON
PIC18F6XJ1X PIC18F8XJ1X 0000 ----
0000 ----
uuuu ----
SPBRG1
PIC18F6XJ1X PIC18F8XJ1X 0000 0000
0000 0000
uuuu uuuu
RCREG1
PIC18F6XJ1X PIC18F8XJ1X 0000 0000
0000 0000
uuuu uuuu
TXREG1
PIC18F6XJ1X PIC18F8XJ1X xxxx xxxx
uuuu uuuu
uuuu uuuu
TXSTA1
PIC18F6XJ1X PIC18F8XJ1X 0000 0010
0000 0010
uuuu uuuu
RCSTA1
PIC18F6XJ1X PIC18F8XJ1X 0000 000x
0000 000x
uuuu uuuu
IPR3
PIR3
PIC18F6XJ1X PIC18F8XJ1X
PIC18F6XJ1X PIC18F8XJ1X
1111 1111
0000 0000
1111 1111
0000 0000
uuuu uuuu
uuuu uuuu⁽³⁾
PIE3
PIC18F6XJ1X PIC18F8XJ1X 0000 0000
0000 0000
uuuu uuuu
IPR2
PIR2
PIC18F6XJ1X PIC18F8XJ1X
PIC18F6XJ1X PIC18F8XJ1X
11-- 1-11
00-- 0-00
11-- 1-11
00-- 0-00
uu-- u-uu
uu-- u-uu⁽³⁾
PIE2
PIC18F6XJ1X PIC18F8XJ1X 00-- 0-00
00-- 0-00
uu-- u-uu
IPR1
PIR1
PIC18F6XJ1X PIC18F8XJ1X
PIC18F6XJ1X PIC18F8XJ1X
1111 1111
0000 0000
1111 1111
0000 0000
uuuu uuuu
uuuu uuuu⁽³⁾
PIE1
PIC18F6XJ1X PIC18F8XJ1X 0000 0000
0000 0000
uuuu uuuu
MEMCON
PIC18F6XJ1X PIC18F8XJ1X 0-00 --00
0-00 --00
u-uu --uu
OSCTUNE PIC18F6XJ1X PIC18F8XJ1X -0-- ----
-0-- ----
-u-- ----
Legend: u = unchanged, x = unknown, - = unimplemented bit, read as ‘0’, q = value depends on condition.
Shaded cells indicate conditions do not apply for the designated device.
Note 1: When the wake-up is due to an interrupt and the GIEL or GIEH bit is set, the TOSU, TOSH and TOSL are
updated with the current value of the PC. The STKPTR is modified to point to the next location in the
hardware stack.
2: When the wake-up is due to an interrupt and the GIEL or GIEH bit is set, the PC is loaded with the interrupt
vector (0008h or 0018h).
3: One or more bits in the INTCONx or PIRx registers will be affected (to cause wake-up).
4: See Table 4-1 for Reset value for specific condition.
 2005 Microchip Technology Inc.
Advance Information
DS39663A-page 51