PIC18F87J10 Datasheet, PDF (347/394 Pages) Microchip Technology – 64/80-Pin High-Performance, 1-Mbit Flash Microcontrollers with nanoWatt Technology

PIC18F87J10 FAMILY
26.3 DC Characteristics: PIC18F87J10 Family (Industrial)
DC CHARACTERISTICS
Standard Operating Conditions (unless otherwise stated)
Operating temperature -40°C ≤ TA ≤ +85°C for industrial
Param
No.
Symbol
Characteristic
Min
Max Units
Conditions
VIL
D030
D030A
D031
Input Low Voltage
I/O ports:
with TTL buffer
with Schmitt Trigger buffer
VSS
0.15 VDD V VDD < 3.3V
—
0.8
V 3.3V ≤ VDD ≤ 3.6V
VSS
0.2 VDD V
D032
D033
D033A
MCLR
OSC1
OSC1
VSS
0.2 VDD V
VSS
0.3 VDD V HS, HSPLL modes
VSS
0.2 VDD V EC modes⁽¹⁾
D034
VIH
D040
D040A
D041
T13CKI
Input High Voltage
I/O ports:
with TTL buffer
with Schmitt Trigger buffer
VSS
0.3 VDD V
0.25 VDD + 0.8V VDD
2.0
VDD
0.8 VDD
VDD
V VDD < 3.3V
V 3.3V ≤ VDD ≤ 3.6V
V
D042
D043
D043A
MCLR
OSC1
OSC1
0.8 VDD
0.7 VDD
0.8 VDD
VDD
V
VDD
V HS, HSPLL modes
VDD
V EC mode
D044
IIL
D060
T13CKI
Input Leakage Current^(2,3)
I/O ports
1.6
VDD
V
—
±1
µA VSS ≤ VPIN ≤ VDD,
Pin at high-impedance
D061
MCLR
—
±5
µA Vss ≤ VPIN ≤ VDD
D063
OSC1
—
±5
µA Vss ≤ VPIN ≤ VDD
IPU
Weak Pull-up Current
D070 IPURB PORTB weak pull-up current
50
400
µA VDD = 3.3V, VPIN = VSS
Note 1: In RC oscillator configuration, the OSC1/CLKI pin is a Schmitt Trigger input. It is not recommended that the
PICmicro^® device be driven with an external clock while in RC mode.
2: The leakage current on the MCLR pin is strongly dependent on the applied voltage level. The specified
levels represent normal operating conditions. Higher leakage current may be measured at different input
voltages.
3: Negative current is defined as current sourced by the pin.
 2005 Microchip Technology Inc.
Advance Information
DS39663A-page 345