PIC18F87J10 Datasheet, PDF (13/394 Pages) Microchip Technology – 64/80-Pin High-Performance, 1-Mbit Flash Microcontrollers with nanoWatt Technology

PIC18F87J10 FAMILY
TABLE 1-3: PIC18F6XJ10/6XJ15 PINOUT I/O DESCRIPTIONS (CONTINUED)
Pin Name
Pin Number _{Pin Buffer}
TQFP
Type Type
Description
RB0/INT0/FLT0
RB0
INT0
FLT0
PORTB is a bidirectional I/O port. PORTB can be software
programmed for internal weak pull-ups on all inputs.
48
I/O TTL
Digital I/O.
I
ST
External interrupt 0.
I
ST
ECCP1/2/3 Fault input.
RB1/INT1
RB1
INT1
47
I/O TTL
Digital I/O.
I
ST
External interrupt 1.
RB2/INT2
RB2
INT2
46
I/O TTL
Digital I/O.
I
ST
External interrupt 2.
RB3/INT3
RB3
INT3
45
I/O TTL
Digital I/O.
I
ST
External interrupt 3.
RB4/KBI0
RB4
KBI0
44
I/O TTL
Digital I/O.
I
TTL
Interrupt-on-change pin.
RB5/KBI1
RB5
KBI1
43
I/O TTL
Digital I/O.
I
TTL
Interrupt-on-change pin.
RB6/KBI2/PGC
RB6
KBI2
PGC
42
I/O TTL
Digital I/O.
I
TTL
Interrupt-on-change pin.
I/O
ST
In-Circuit Debugger and ICSP™ programming clock
pin.
RB7/KBI3/PGD
RB7
KBI3
PGD
37
I/O TTL
Digital I/O.
I
TTL
Interrupt-on-change pin.
I/O
ST
In-Circuit Debugger and ICSP programming data pin.
Legend:
TTL = TTL compatible input
ST = Schmitt Trigger input with CMOS levels
I = Input
P = Power
CMOS
Analog
O
OD
= CMOS compatible input or output
= Analog input
= Output
= Open-Drain (no P diode to VDD)
Note 1: Default assignment for ECCP2/P2A when configuration bit CCP2MX is set.
2: Alternate assignment for ECCP2/P2A when configuration bit CCP2MX is cleared.
 2005 Microchip Technology Inc.
Advance Information
DS39663A-page 11