English
Language : 

PIC18F87J90 Datasheet, PDF (62/450 Pages) Microchip Technology – 64/80-Pin, High-Performance Microcontrollers with LCD Driver and nanoWatt Technology
PIC18F87J90 FAMILY
TABLE 5-2: INITIALIZATION CONDITIONS FOR ALL REGISTERS (CONTINUED)
Register
Applicable Devices
Power-on Reset,
Brown-out Reset
MCLR Resets
WDT Reset
RESET Instruction
Stack Resets
Wake-up via WDT
or Interrupt
IPR3
PIR3
PIC18F6XJ90 PIC18F8XJ90
PIC18F6XJ90 PIC18F8XJ90
-111 1111
-000 0000
-111 1111
-000 0000
-uuu 1111
-uuu 0000(3)
PIE3
PIC18F6XJ90 PIC18F8XJ90
-000 0000
-000 0000
-uuu 0000
IPR2
PIR2
PIC18F6XJ90 PIC18F8XJ90
PIC18F6XJ90 PIC18F8XJ90
11-- 111-
00-- 000-
11-- 111-
00-- 000-
uu-- uuu-
uu-- uuu-(3)
PIE2
PIC18F6XJ90 PIC18F8XJ90
00-- 000-
00-- 000-
uu-- uuu-
IPR1
PIR1
PIC18F6XJ90 PIC18F8XJ90
PIC18F6XJ90 PIC18F8XJ90
-111 1-11
-000 0-00
-111 1-11
-000 0-00
-uuu u-uu
-uuu u-uu(3)
PIE1
PIC18F6XJ90 PIC18F8XJ90
-000 0-00
-000 0-00
-uuu u-uu
OSCTUNE
PIC18F6XJ90 PIC18F8XJ90
0000 0000
0000 0000
uuuu uuuu
TRISJ
PIC18F6XJ90 PIC18F8XJ90
1111 1111
1111 1111
uuuu uuuu
TRISH
PIC18F6XJ90 PIC18F8XJ90
1111 1111
1111 1111
uuuu uuuu
TRISG
PIC18F6XJ90 PIC18F8XJ90
0001 1111
0001 1111
uuuu uuuu
TRISF
PIC18F6XJ90 PIC18F8XJ90
1111 111-
1111 111-
uuuu uuu-
TRISE
PIC18F6XJ90 PIC18F8XJ90
1111 1-11
1111 1-11
uuuu u-uu
TRISD
PIC18F6XJ90 PIC18F8XJ90
1111 1111
1111 1111
uuuu uuuu
TRISC
PIC18F6XJ90 PIC18F8XJ90
1111 1111
1111 1111
uuuu uuuu
TRISB
TRISA(5)
PIC18F6XJ90 PIC18F8XJ90
PIC18F6XJ90 PIC18F8XJ90
1111 1111
1111 1111(5)
1111 1111
1111 1111(5)
uuuu uuuu
uuuu uuuu(5)
LATJ
PIC18F6XJ90 PIC18F8XJ90
xxxx xxxx
uuuu uuuu
uuuu uuuu
LATH
PIC18F6XJ90 PIC18F8XJ90
xxxx xxxx
uuuu uuuu
uuuu uuuu
LATG
PIC18F6XJ90 PIC18F8XJ90
00-x xxxx
00-u uuuu
uu-u uuuu
LATF
PIC18F6XJ90 PIC18F8XJ90
xxxx xxx-
uuuu uuu-
uuuu uuu-
LATE
PIC18F6XJ90 PIC18F8XJ90
xxxx x-xx
uuuu u-uu
uuuu u-uu
LATD
PIC18F6XJ90 PIC18F8XJ90
xxxx xxxx
uuuu uuuu
uuuu uuuu
LATC
PIC18F6XJ90 PIC18F8XJ90
xxxx xxxx
uuuu uuuu
uuuu uuuu
LATB
LATA(5)
PIC18F6XJ90 PIC18F8XJ90
PIC18F6XJ90 PIC18F8XJ90
xxxx xxxx
xxxx xxxx(5)
uuuu uuuu
uuuu uuuu(5)
uuuu uuuu
uuuu uuuu(5)
PORTJ
PIC18F6XJ90 PIC18F8XJ90
xxxx xxxx
uuuu uuuu
uuuu uuuu
PORTH
PIC18F6XJ90 PIC18F8XJ90
xxxx xxxx
uuuu uuuu
uuuu uuuu
PORTG
PIC18F6XJ90 PIC18F8XJ90
000x xxxx
000u uuuu
000u uuuu
PORTF
PIC18F6XJ90 PIC18F8XJ90
xxxx xxx-
uuuu uuu-
uuuu uuu-
Legend: u = unchanged, x = unknown, - = unimplemented bit, read as ‘0’, q = value depends on condition.
Shaded cells indicate conditions do not apply for the designated device.
Note 1: When the wake-up is due to an interrupt and the GIEL or GIEH bit is set, the TOSU, TOSH and TOSL are
updated with the current value of the PC. The STKPTR is modified to point to the next location in the
hardware stack.
2: When the wake-up is due to an interrupt and the GIEL or GIEH bit is set, the PC is loaded with the interrupt
vector (0008h or 0018h).
3: One or more bits in the INTCONx or PIRx registers will be affected (to cause wake-up).
4: See Table 5-1 for Reset value for specific conditions.
5: Bits 6 and 7 of PORTA, LATA and TRISA are enabled depending on the oscillator mode selected. When
not enabled as PORTA pins, they are disabled and read as ‘0’.
DS39933D-page 62
 2010 Microchip Technology Inc.