PIC18F87J90 Datasheet, PDF (330/450 Pages) Microchip Technology – 64/80-Pin, High-Performance Microcontrollers with LCD Driver and nanoWatt Technology

PIC18F87J90 FAMILY
REGISTER 25-6: CONFIG3H: CONFIGURATION REGISTER 3 HIGH (BYTE ADDRESS 300005h)
U-0
U-0
U-0
U-0
U-0
U-0
U-0
R/WO-1
—⁽¹⁾
—⁽¹⁾
—⁽¹⁾
—⁽¹⁾
—
—
—
CCP2MX
bit 7
bit 0
Legend:
R = Readable bit
WO = Write-Once bit
-n = Value when device is unprogrammed
U = Unimplemented bit, read as ‘0’
‘1’ = Bit is set
‘0’ = Bit is cleared
bit 7-1
bit 0
Unimplemented: Read as ‘0’
CCP2MX: CCP2 MUX bit
1 = CCP2 is multiplexed with RC1
0 = CCP2 is multiplexed with RE7
Note 1: The value of these bits in program memory should always be ‘1’. This ensures that the location is
executed as a NOP if it is accidentally executed.
REGISTER 25-7: DEVID1: DEVICE ID REGISTER 1 FOR PIC18F87J90 FAMILY DEVICES
R
DEV2
bit 7
R
DEV1
R
DEV0
R
REV4
R
REV3
R
REV2
R
REV1
R
REV0
bit 0
Legend:
R = Read-only bit
bit 7-5
bit 4-0
DEV<2:0>: Device ID bits
101 = PIC18F87J90
100 = PIC18F86J90
001 = PIC18F67J90
000 = PIC18F66J90
REV<4:0>: Revision ID bits
These bits are used to indicate the device revision.
REGISTER 25-8: DEVID2: DEVICE ID REGISTER 2 FOR PIC18F87J90 FAMILY DEVICES
R
DEV10⁽¹⁾
bit 7
R
DEV9⁽¹⁾
R
DEV8⁽¹⁾
R
DEV7⁽¹⁾
R
DEV6⁽¹⁾
R
DEV5⁽¹⁾
R
DEV4⁽¹⁾
R
DEV3⁽¹⁾
bit 0
Legend:
R = Read-only bit
bit 7-0
DEV<10:3>: Device ID bits⁽¹⁾
These bits are used with the DEV<2:0> bits in the Device ID Register 1 to identify the part number.
0101 0000 = PIC18F87J90 family devices
Note 1: The values for DEV<10:3> may be shared with other device families. The specific device is always
identified by using the entire DEV<10:0> bit sequence.
DS39933D-page 330
 2010 Microchip Technology Inc.