SE7210TP1-E Datasheet, PDF (95/145 Pages) Intel Corporation – Intel® Server Board Technical Product Specification

Intel® Server Board SE7210TP1-E TPS
Platform Management Architecture
In-band
Traffic
LAN
RMCP
Port
26Fh
NIC #1
side-band connection
PCI
mBMC
System Bus
Figure 12 - IPMI-over-LAN
RMCP includes a field that indicates the class of messages that can be embedded in an RMCP
message packet. For RMCP version 1.0, the defined classes are IPMI, ASF, and OEM. IPMI-
over-LAN uses the IPMI class to transfer IPMI Messages encapsulated in RMCP packets.
Intelligent Platform Management Interface v1.5 Specification specifies the packet formats and
commands used to perform IPMI Messaging on LAN via RMCP.
The management controller transmits to other port addresses as needed. For example, LAN
Alerts, which are sent as SNMP Traps, can be transmitted to the SNMP Trap ‘well known’ port
address, 162 (0A2h).
5.1.6.1
LAN Channel Specifications
The following table presents the minimum support that will be provided. Note that system
management software and utilities may not use all the available management controller options
and capabilities. For detailed technical information on the operation of the LAN channel
operation and LAN Alerting, refer to Intelligent Platform Management Interface v1.5
Specification.
Table 49: LAN Channel Specifications
Configuration Capability
Options
Channel Access Modes
always-active,
disabled
Number of Sessions
Number of Users
Configurable User Names
Configurable User
Passwords
1 (Essentials)
1 (Essentials)
No (Essentials)
Yes
Description/Notes
This option determines when the National
Semiconductor PC87431 integrated management
controller can be accessed via IPMI Messaging over
LAN.
The number of simultaneous sessions that can be
supported is shared across the LAN and serial/modem
channels.
User information is a resource that is shared across the
LAN and serial/modem channels.
User information is a resource that is shared across the
LAN and serial/modem channels.
Revision 2.0
81