SE7210TP1-E Datasheet, PDF (137/145 Pages) Intel Corporation – Intel® Server Board Technical Product Specification

Intel® Server Board SE7210TP1-E TPS
Environmental Specifications
8. Environmental Specifications
8.1 Absolute Maximum Ratings
Operating a Server Board SE7210TP1-E at conditions, beyond those shown in the following
table, may cause permanent damage to the system. The table is provided for stress testing
purposes only. Exposure to absolute maximum rating conditions for extended periods may
affect system reliability.
Table 88. Absolute Maximum Ratings
Operating Temperature
5 degrees C to 50 degrees C ¹
Storage Temperature
Voltage on any signal with respect to ground
-55 degrees C to +150 degrees C
-0.3 V to Vdd + 0.3V ²
3.3 V Supply Voltage with Respect to ground -0.3 V to 3.63 V
5 V Supply Voltage with Respect to ground
-0.3 V to 5.5 V
Notes:
1. Chassis design must provide proper airflow to avoid exceeding the Intel^® Pentium^® 4 processor
maximum case temperature.
2. VDD means supply voltage for the device.
8.2 SE7210TP1-E Power Budget
The following table shows the power consumed on each supply line for an Intel Server
Board SE7210TP1-E that is configured with one Intel Pentium 4 processor (pulling max
current), all PCI slots full and pulling max amount of current, memory completely full, USB
pulling max current, and fans assuming max current. The numbers provided in the table
should be used for reference purposes only. Different hardware configurations will produce
different numbers. The numbers in the table reflect a common usage model operating at
higher-than-average stress levels.
Device(s)
Processors
Memory DIMMs
Server board
Fans
Keyboard/Mouse
PCI slots
Table 89. SE7210TP1-E Power Budget
3.3V
+5V
+12V -12V 5V Standby
0
0
10.73
0
10.44
0
4.96
4.633
0.25
0.1 1.8
0
0
0.8
0
0.14
0
13.65
3
0.5
Total Current
Total Power
18.61
61.413
18.213 12.28
0.1 1.8
91.065 147.36 1.2 9
Total
310.038
Revision 2.0
123