SE7210TP1-E Datasheet, PDF (55/145 Pages) Intel Corporation – Intel® Server Board Technical Product Specification

Intel® Server Board SE7210TP1-E TPS
System BIOS
ID
Feature Name
Support for BIOS recovery.
Comments
• LS120/LS240
• USB bootable devices such as disk-on-key
(USB 1.1/2.0)
• USB CD-ROM(1.1/2.0)
• ATAPI CD-ROM
• ATAPI DVD
• Support for legacy/USB floppy only due to
BIOS image size (1MB).
Legacy USB device support.
• Legacy USB KB/MS
• Implemented by SMI
Post Code/Port 80 Capture: Support POST Progress
FIFO feature. Will be able to capture all POST Codes
and Port 80 codes for debugging with onboard LEDs.
Supported via onboard LEDs.
POST check points are logged in the National
Semiconductor PC87431 integrated management
controller.
NMI dump switch support.
Logging of NMI dump event.
• Front panel NMI button.
• Operating system will log the dump data if NMI
button is pressed.
Power Switch Disable: Power switch can be disabled.
This is supported by the National Semiconductor
PC87431 integrated management controller through
IPMI commands.
BIOS Boot Block: BIOS will have a segregated boot
block enabling recovery of a corrupted BIOS. Will have
BIOS Recovery Jumper.
Force BIOS recovery by jumper or when BIOS
corruption is detected.
Protect boot block by using the block lock feature built
into the flash device.
BIOS Update: Enable Flash BIOS update and allow
updates from network drives in DOS and via PXE.
Support for CD-ROM, USB storage and network,
except for floppy.
Chassis intrusion detection.
LDCM will detect chassis intrusion state, and notify
administrator via network.
Hardware support for monitoring voltages, temperature, Supported by National Semiconductor PC87431
and fans.
integrated management controller.
BIOS Setup will provide options to disable onboard I/O
peripheral components (LAN components, Serial ATA,
SCSI, etc.). When disabled, these components are to
be completely removed from the PCI address space,
making them invisible to any loaded operating system.
Must be able to disable embedded video (ATI* RAGE
XL), SCSI (LSI* 53C1030), ICH5R serial ATA, and
NIC controllers.
BIOS Setup will provide options to disable/enable
Option ROMs of onboard devices and PCI slots.
Enable/disable Option ROMs by BIOS setup.
Ability to store error events in non-volatile space.
System stores events via National Semiconductor
PC87431 integrated management controller.
Support for Split Option ROM, based on PCI-SIG PCI
Firmware Specification Revision 3.0.
Active thermal management to minimize noise at the
system level. Will adhere to acoustic specifications.
Supported via the National Semiconductor PC87431
integrated management controller.
Factory Automation support. This includes the ability to
upgrade/update FW, BIOS, CMOS settings, OEM
splash screen image, FRU/SDR and HSC code
remotely (over a LAN) using automated tools in a
volume production environment.
NMI detection.
Ability to detect parity/system errors on all PCI buses.
Ability to detect single/double bit errors.
Revision 2.0
41