SE7210TP1-E Datasheet, PDF (69/145 Pages) Intel Corporation – Intel® Server Board Technical Product Specification

Intel® Server Board SE7210TP1-E TPS
System BIOS
4.8.4.4.5
Enable SATA RAID, & Map PATA to Legacy ATA Sub-menu Selections
To access this menu, select Advanced on the menu bar, then IDE Configuration.
Main
Advanced
Boot
Security
Server
Exit
>CPU Configuration
>IDE Configuration
>Floppy Configuration
>Super I/O Configuration
>USB Configuration
>PCI Configuration
The submenu represented by Table 25 is used to configure the IDE Configuration.
Feature
P-ATA Channel
Selection
Table 25. Primary/Secondary/Third/Fourth Master/Slave Submenu
Options
Description
• Primary
Selection determines assignment of only primary,
• Secondary
• Both (default)
only secondary or both ATA channel addresses
for the PATA ports.
4.8.4.4.6
Primary/Secondary/Third/Fourth Master/Slave Submenus
To access these submenus, select Advanced on the menu bar, then Drive Configuration, and
then the master or slave to be configured.
Main
Advanced
Boot
Security
Server
Exit
>CPU Configuration
>IDE Configuration
>Floppy Configuration
>Super I/O Configuration
>USB Configuration>DMI Event Logging
>PCI Configuration>USB Configuration
There are four IDE submenus: primary master, primary slave, secondary master, and secondary
slave. Table 26 shows the format of the IDE submenus. For brevity, only one example is shown.
Feature
Type
Table 26. Primary/Secondary/Third/Fourth Master/Slave Submenu
Options
• Not Installed
• Auto (default)
• CDROM
• ARMD
Description
Select the type of device connected to the system.
Revision 2.0
55