SE7210TP1-E Datasheet, PDF (131/145 Pages) Intel Corporation – Intel® Server Board Technical Product Specification

Intel® Server Board SE7210TP1-E TPS
Connector Pin-Outs and Jumper Blocks
7.7 6300ESB I/O IDE Connectors
The SE7210TP1-E board provides two 40-pin, low-density 6300ESB I/O IDE connectors. The
pin out for both connectors is identical and is listed in the following table.
Table 77. 6300ESB I/O IDE 40-pin Connector Pin Out (J4J2, J4J3)
Pin
Signal Name
Pin
Signal Name
1 Reset IDE
2 Ground
3 Data 7
4 Data 8
5 Data 6
6 Data 9
7 Data 5
8 Data 10
9 Data 4
10 Data 11
11 Data 3
12 Data 12
13 Data 2
14 Data 13
15 Data 1
16 Data 14
17 Data 0
18 Data 15
19 Ground
20 Key
21 DDRQ0 [DDRQ1]
22 Ground
23 I/O Write#
24 Ground
25 I/O Read#
26 Ground
27 IOCHRDY
28 Ground
29 DDACK0# [DDACK1#]
30 Ground
31 IRQ 14 [IRQ 15]
32 Not connected
33 PDA1 (Address 1)
34 GPIO_DMA66_Detect_Pri
(GPIO_DMA66_Detect_Sec)
35 PDA0 (Address 0)
36 PDA2 (Address 2)
37 Chip Select 1P#
[Chip Select 1S#]
38 Chip Select 3P#
[Chip Select 3S#]
39 HD_LED_PRI*/HD_LED_SEC* 40 Ground
7.8 Front Panel USB Header
A header on the server board provides an option to support one additional USB connector. The
pin out of the header is detailed in the following table.
Pin
1
Table 78. Front Panel USB Connector Pin-out (J5G1)
Signal Name
Pin
Signal Name
USB_FNT1_PWR
2
USB_FNT1_PWR
3
NC
4
USB_FRONT1*
5
NC
6
USB_FRONT1
7
Ground
8
Ground
9
Key
10
USB_ OC_FNT_R1
Note: USB ports may be assigned as needed.
Revision 2.0
117