SE7210TP1-E Datasheet, PDF (68/145 Pages) Intel Corporation – Intel® Server Board Technical Product Specification

Intel® Server Board SE7210TP1-E TPS
System BIOS
Main
Advanced
Boot
Security
Server
Exit
>CPU Configuration
>IDE Configuration
>Floppy Configuration
>Super I/O Configuration
>USB Configuration
>PCI Configuration
The submenu represented by Table 23 is used to configure the IDE Configuration.
Table 23. Primary/Secondary/Third/Fourth Master/Slave Submenu
Feature
Options
S-ATA Ports Definition • A1-PRI, A2-SEC. (default)
• A1-SEC, A2-PRI.
Description
This option allows swapping of port mappings
between the third and fourth ATA channels for the
SATA ports.
4.8.4.4.3
Map PATA & SATA to Legacy ATA Sub-menu Selections
To access this menu, select Advanced on the menu bar, then IDE Configuration.
Main
Advanced
Boot
Security
Server
Exit
>CPU Configuration
>IDE Configuration
>Floppy Configuration
>Super I/O Configuration
>USB Configuration
>PCI Configuration
The submenu represented by Table 24 is used to configure the IDE Configuration.
Table 24. Primary/Secondary/Third/Fourth Master/Slave Submenu
Feature
Combined Mode
Option
Options
• PATA-PRI, SATA-SEC. (default)
• PATA-SEC, SATA-PRI
Description
The PATA port is assigned the primary or
secondary ATA channel addresses; the SATA port
is assigned the remaining channel address.
4.8.4.4.4
54
Revision 2.0