SE7210TP1-E Datasheet, PDF (117/145 Pages) Intel Corporation – Intel® Server Board Technical Product Specification

Intel® Server Board SE7210TP1-E TPS
Error Reporting and Handling
The error codes are defined by Intel and, whenever possible, are backward compatible with
error codes used on earlier platforms.
6.2.1
BIOS Error Messages
During POST, if an error is detected, the BIOS will display an error code and message to the
screen. The following table defines POST error codes and their associated messages. The
BIOS prompts the user to press a key in case of serious errors. Some of the error messages are
preceded by the string "Error” to highlight the fact that the system may be malfunctioning. All
POST errors and warnings are logged in the SEL
Error Code
0000
0003
0004
0005
0008
0009
000A
000B
000C
000E
000F
0010
0012
0014
0040
0041
0042
0043
0044
0045
0046
0047
0048
0049
004A
004B
004C
004D
Revision 2.0
Table 58: POST Error Messages and Handling
Error Message
Timer Error
CMOS Battery Low
CMOS Settings Wrong
CMOS Checksum Bad
Unlock Keyboard
PS2 Keyboard not found
KBC BAT Test failed
CMOS memory size different
RAM R/W test failed
A: Drive Error
B: Drive Error
Floppy Controller Failure
CMOS Date/Time not set
PS2 Mouse not found
Refresh timer test failed
Display memory test failed
CMOS Display Type Wrong
~<INS> Pressed
DMA Controller Error
DMA-1 Error
DMA-2 Error
Unknown BIOS error. Error code = 147 (this is really a
PMM_MEM_ALLOC_ERR)
Password check failed
Unknown BIOS error. Error code = 149 (this is really
SEGMENT_REG_ERR)
Unknown BIOS error. Error code = 14A (this is really
ADM_MODULE_ERR)
Unknown BIOS error. Error code = 14B (this is really
LANGUAGE_MODULE_ERR)
Keyboard/Interface Error
Primary Master Hard Disk Error
Response
Pause
Pause
Pause
Pause
Halt
Not an error
Halt
Pause
Pause
Pause
Pause
Pause
Pause
Not an error
Halt
Pause
Pause
Pause
Halt
Halt
Halt
Halt
Halt
Halt
Pause
Pause
Pause
Pause
103