SE7210TP1-E Datasheet, PDF (82/145 Pages) Intel Corporation – Intel® Server Board Technical Product Specification

Intel® Server Board SE7210TP1-E TPS
System BIOS
The submenu represented in Table 42 is for setting the Event Log Configuration.
Table 42. Event Log Configuration Submenu
Feature
Options
Clear All Event Logs • Disabled (default)
• Enabled
Event Logging
• Disabled
• Enabled (default)
Critical Event
Logging
• Disabled
• Enabled (default)
ECC Event Logging
PCI Error logging
• Disabled
• Enabled (default)
• Disabled
• Enabled (default)
Description
Setting this to Enabled will clear the DMI event log after
system booting.
Select Enabled to allow logging of events.
If enabled, BIOS will detect and log events for system
critical errors. Critical errors are fatal to system operation.
These errors include PERR, SERR, and ECC.
4.8.8
Exit Menu
To access this menu, select Exit from the menu bar at the top of the screen.
Main
Advanced Boot
Security
Server
Exit
The menu represented in Table 43 is for exiting the BIOS Setup program, saving changes, and
loading and saving defaults.
Feature
Save Changes and Exit
Discard Changes and Exit
Discard Changes
Load Optimal Defaults
Load Failsafe Defaults
Load Custom Defaults
Save Custom Defaults
Table 43. Exit Menu
Description
Exits and saves the changes in CMOS SRAM.
F10 key can be used for this operation.
Exits without saving any changes made in the BIOS Setup program.
ESC key can be used for this operation.
Discards changes without exiting Setup. The option values present when the server
was turned on are used.
F7 key can be used for this operation
Load Optimal Default values for all the setup questions.
F9 key can be used for this operation.
Load Failsafe Default values for all the setup questions.
F8 key can be used for this operation.
Load Custom Defaults
Save Custom Defaults
68
Revision 2.0