SE7210TP1-E Datasheet, PDF (66/145 Pages) Intel Corporation – Intel® Server Board Technical Product Specification

Intel® Server Board SE7210TP1-E TPS
System BIOS
4.8.4.4
IDE Configuration Submenu
To access this submenu, select Advanced on the menu bar, then IDE Configuration.
Main
Advanced
Boot
Security
Server
Exit
>CPU Configuration
>IDE Configuration
>Floppy Configuration
>Super I/O Configuration
>USB Configuration
>PCI Configuration
The submenu represented by Table 21 is for IDE Configuration.
Table 21. IDE Configuration Submenu
Feature
ATA Configuration
Map PATA to Legacy
ATA, Config SATA.
Map SATA to Legacy
ATA, Disable PATA
Map PATA & SATA to
Legacy ATA
Enable SATA
RAID, & Map PATA to
Legacy ATA
>Primary IDE Master
>Primary IDE Slave
>Secondary IDE Master
>Secondary IDE Slave
>Third IDE Master
>Fourth IDE Master
Hard Disk Write Protect
Options
• [DISABLE PATA/SATA]
• [CONFIG PATA & SATA]
(default)
• [CONFIG SATA ATA]
• [LEGACY ATA CONFIG
• [ENABLE SATA RAID]
• Submenu
• Submenu
• Submenu
• Submenu
• Submenu
• Submenu
• Submenu
• Submenu
• Submenu
•
• Submenu
•
• Disable (default)
• Enable
Description
Select ATA mode to change bellow ATA configuration.
The item will be present when selecting CONFIG
PATA & SATA in ATA Configuration.
The item will be present when selecting CONFIG
SATA ATA in ATA Configuration.
The item will be present when selecting LEGACY ATA
CONFIG in ATA Configuration.
The item will be present when selecting ENABLE
SATA RAID in ATA configuration.
When BIOS auto detects the presence of IDE devices,
Setup will display the status of auto-detection of IDE
devices.
Enable write protection.
52
Revision 2.0