SE7210TP1-E Datasheet, PDF (48/145 Pages) Intel Corporation – Intel® Server Board Technical Product Specification

Intel® Server Board SE7210TP1-E TPS
Functional Architecture
• Wired for Management support
• Integrated Alert on LAN* 2 Support
• ACPI and PCI Power Management standards compliance
• Wake on "interesting" packets and link status change support
• Remote power up support
Additional features of the NIC subsystem include:
• PCI bus master interface
• CSMA/CD protocol engine
• PCI power management
• Supports ACPI technology
• Supports LAN wake capabilities
3.4.9.1
RJ-45 LAN Connectors with Integrated LEDs
Two LEDs are built into each RJ-45 LAN connector (as shown in Figure 9). For the 82551QM
NIC, the green LED indicates a link to the LAN and the green LED indicates the connection
speed. Table 10 describes the LED states when the board is powered up and the 10/100
Ethernet LAN subsystem is operating.
Table 10. 10/100 Ethernet LAN Connector LEDs
LED
Left
Right
LED Color
Green
Green
LED State
Off
On
Off
On (steady state)
On (brighter and pulsing)
Indicates
10 Mbit/sec data rate is selected.
100 Mbit/sec data rate is selected.
LAN link is not established.
LAN link is established.
The server is communicating with another
computer on the LAN.
Table 11 describes the LED states when the board is powered up and the 10/100/1000
Mbits/sec LAN subsystem is operating.
Figure 9. LAN Connector LED Locations
Table 11. 10/100/1000 LAN Connector LED States
LED Color
LED State
Left
Green Off
Condition
LAN link is not established.
34
Revision 2.0