SE7210TP1-E Datasheet, PDF (135/145 Pages) Intel Corporation – Intel® Server Board Technical Product Specification

Intel® Server Board SE7210TP1-E TPS
Connector Pin-Outs and Jumper Blocks
7.14 Clear CMOS Jumper
CAUTION
Do not move any jumpers with the power on. Always turn off the power and unplug the power
cord from the server before changing a jumper setting. Otherwise, the board could be damaged.
This 3-pin jumper block allows the user to clear CMOS. Table 85 describes the jumper settings
for the two modes: normal and clear CMOS. When the jumper is set to Clear CMOS mode and
the server is powered-up, the contents of the CMOS are cleared.
Function/Mode
Normal
Table 85. Clear CMOS Jumper Settings (J1D1)
Jumper Setting
Configuration
3
1-2
Normal Operation.
1
Clear CMOS
3
2-3
1
Clears contents of CMOS area.
7.15 PASSWORD Jumper
CAUTION
Do not move any jumpers with the power on. Always turn off the power and unplug the power
cord from the server before changing a jumper setting. Otherwise, the board could be damaged.
This 3-pin jumper block allows the user to clear PASSWORD. Table 86 describes the jumper
settings for the two modes: normal and clear PASSWORD. When the jumper is set to Clear
PASSWORD mode and the server is powered-up, the contents of the PASSWORD are cleared.
Function/Mode
Normal
Table 86. PASSWORD Jumper Settings (J1D1)
Jumper Setting
Configuration
Normal Operation.
5-6
Clear
PASSWORD
6-7
Clears contents of PASSWORD area.
7.16 Write protected Jumper
CAUTION
Do not move any jumpers with the power on. Always turn off the power and unplug the power
cord from the server before changing a jumper setting. Otherwise, the board could be damaged.
Revision 2.0
121