SE7210TP1-E Datasheet, PDF (132/145 Pages) Intel Corporation – Intel® Server Board Technical Product Specification

Intel® Server Board SE7210TP1-E TPS
Connector Pin-Outs and Jumper Blocks
7.9 Floppy Connector
The Intel Server Board SE7210TP1-E provides a 34-pin connector interface to the floppy drive
controller. The following table details the pin out of the 34-pin floppy connector.
Pin
1
3
5
7
9
11
13
15
17
19
21
23
25
27
29
31
33
Table 79. 34-pin Floppy Connector Pin Out (J3H1)
Signal Name
Pin
Signal Name
GND
2
DENSEL
Key
4
NC
Key
6
DRVDEN1
GND
8
FDINDX#
GND
10 MTR0# (Motor Enable A)
GND
12 NC
GND
14 DS0# (Drive Select A)
GND
16 NC
NC
18 DIR# (Stepper Motor Direction)
GND
20 STEP# (Step Pulse)
GND
22 WDATA# (Write Data)
GND
24 WGATE# (Write Enable)
GND
26 TRK0# (Track 0)
NC
28 WRTPRT# (Write Protect)
GND
30 RDATA# (Read Data)
GND
32 HDSEL# (Side 1 Select)
GND
34 DSKCHG# (Diskette Change)
7.10 Serial Port Connector
The Intel Server Board SE7210TP1-E has one 9-pin D-sub serial port connector and one 2 x 5
serial port connector. The following tables detail the pin outs of these two ports.
Table 80. 9-pin Serial A Port Pin Out (J8A1)
Pin
Signal Name
1 DCD (Data Carrier Detect)
2 RXD (Receive Data)
3 TXD (Transmit Data)
4 DTR (Data Terminal Ready)
5 GND
6 DSR (Data Set Ready)
7 RTS (Request to Send)
8 CTS (Clear to Send)
9 RI (Ring Indicator)
118
Revision 2.0