SE7210TP1-E Datasheet, PDF (17/145 Pages) Intel Corporation – Intel® Server Board Technical Product Specification

Server Board Overview
Intel® Server Board SE7210TP1-E TPS
2. Server Board Overview
The Intel® Server Board SE7210TP1-E is a monolithic printed circuit board with features that
were designed to support the entry server markets.
2.1 SE7210TP1-E SKU Availability
In this document, ”SE7210TP1-E” will be used to describe the family of boards that will be made
available under a common marketing name. The core features for each board will be common;
however each board will have the following distinctions:
SE7210TP1:
SE7210TP1SCSI:
SR1325TP1:
Onboard SATA (RAID)
Onboard SCSI + Onboard SATA (RAID)
Onboard SATA (RAID) + Low Profile PCI Slot and Riser
Throughout this document, all references to SE7210TP1-E will refer to all three board SKUs
unless specifically noted otherwise. The board you select to use may or may not have all the
features described based on the listed board differences.
2.2 SE7210TP1-E Feature Set
The Intel Server Board SE7210TP1-E provides the following feature set:
o Support for an Intel^® Celeron processor or an Intel^® Pentium^® 4 processor with hyper-
threading technology in a µPGA478 socket.
o 400/533/800 MHz Front Side Bus (FSB)
o Intel^® E7210 chipset
• Intel^® 827210 Memory Controller Hub (MCH)
• Intel^® 6300ESB I/O Controller Hub
• Intel^® 82802AC 8 Megabit Firmware Hub (FWH)
o Support for single-sided or double-sided dual inline memory module (DIMM) double-data
rate (DDR) memory providing up to 4 GB of system memory with four 184-pin DIMM
sockets.
• PC3200 (400 MHz): to run 400 MHz memory at full speed requires an Intel Pentium 4
processor with 800 MHz system bus frequency.
• PC2700 (333 MHz): to run 333 MHz memory at full speed requires an Intel Pentium 4
processor with 533 MHz system bus frequency.
Note: PC2700 (333 MHZ) memory will run at 320 MHz frequency when using an Intel
Pentium 4 processor with 800 MHz system bus frequency.
• PC2100 (266 MHZ): PC2100 (266 MHZ) memory may only be used with an Intel
Pentium 4 processor with 400 MHz or 533 MHz system bus frequency only.
o Intel 82547GI Platform LAN Connect (PLC) device for 10/100/1000 Mbits/sec Ethernet LAN
connectivity
o Intel 82551QM device for 10/100 Mbits/sec Ethernet LAN connectivity
Revision 2.0
3