MB86613S Datasheet, PDF (35/134 Pages) Fujitsu Component Limited. – IEEE1394 Open HCI Controller

Preliminary
Bit
----
31
30
29
23
22
19
18
17
16
Field Name
rscu
-------------- ----
BIBimageValid
rsc
noByteSwapData rsc
ackTardyEnable rsc
programPhyEnable r
aPhyEnhanceEnbl r
LPS
rsc
postedWriteEnable rsc
linkEnable
rsu
softReset
rsu
reset
--------
0b
description
------------------------------------------
When this bit is zero, return ack_type_error on block
read requests.
When this bit is set, enable the mechanism of
automatically updating configuration ROM.
undefined Big Endian: specify ”1”. Little Endian: specify ”0”.
0b
reserved
0b
This bit always indicates ”0”.
1b
This bit always indicates ”1”.
0b
Specifying “1” at this bit sets the LINK to ON.
undefined Specifying ”1” at this bit supports the posted write
function.
0b
Specifying ”1” at this bit makes the LINK enabled.
*
”1” at this bit performs the software reset. ”1” is indicated
during the hardware or software reset.
3.2.13. Self ID Buffer Pointer
Specify the host memory base address where the received self ID packet is stored.
31
24 23
16 15
87
0
selfIDBufferPtr
Bit
----
31:0
Field Name
rwu
-------------- ----
selfIDBufferPtr
rw
reset
--------
undefined
description
------------------------------------------
Specify the base address of the host memory where the
received self ID packet is stored. (2048- byte boundary)
34