MB86613S Datasheet, PDF (130/134 Pages) Fujitsu Component Limited. – IEEE1394 Open HCI Controller

Preliminary
Annex 1.1. Vendor Option Register
Vendor option register consists of various mode setting registers for packet transfer. The followings are the
letters used in the register descriptions.
”r” denotes the register that can be read out.
”w” denotes the register that can be written.
”s” denotes the register that ”1” can be written.
”c” denotes the register whose value can be cleared to ”0”.
”u” denotes the register whose value is undefined depending on the MB86613S device status.
Figure C.2 lists the Vendor Option Register.
31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
000h
to
03Ch
PacketControlSet
PacketControlClear
040h
044h
048h
to
05Ch
BusResetState
060h
ConnectionTimeout
064h
BusResetDetect
068h
MaxArbStateTimeout
ForceRootTimeout
06Ch
070h
BiasHandshake
074h
BiasFilterTime
078h
074h
to
07Ch
: denotes the reserved (unused) area.
Fig. C.2 Vendor Option Register
129