MB86613S Datasheet, PDF (103/134 Pages) Fujitsu Component Limited. – IEEE1394 Open HCI Controller

Preliminary
7.4.5 PMCSR Bridge Support Extension(PMCSR_BSE) Register
This register indicates the function of the power management on the PCI bridge.
It indicates ”00h” because the MB86613S is not equipped with the PCI bridge function.
23
16
BPCC_en
B2_B3#
Fig. 7.15 PMCSR Bridge Support Extension Register Map
Bit size Field Name
rwcu
----- -------------- ----
23
BPCC_en
r
reset
description
-------- ------------------------------------------
0b
This bit indicates ”0b”.
22
B2_B3#
r
0b
This bit indicates ”0b”.
7.4.6 Data Register
This register indicates the consumptive power and the temperature of the MB86613S.
The setting value at the data_select field determines the state of the register as follows.
”0h” : The consumptive power in the D0 state is indicated.
”1h” : The consumptive power in the D1 state is indicated.
”2h” : The consumptive power in the D2 state is indicated.
”3h” : The consumptive power in the D3 state is indicated.
”4h” : The temperature in the D0 state is indicated.
”5h” : The temperature in the D1 state is indicated.
”6h” : The temperature in the D2 state is indicated.
”7h” : The temperature in the D3 state is indicated.
”8h” : The consumptive power in the normal transfer is indicated.
The setting value at the data_scale field determines the range to be indicated as follows.
”0h” : Prohibit to set.
”1h” : 0- 25.5 (W) data X 10^- 1
”2h” : 0- 2.55 (W) data X 10^- 2
”3h” : 0- 255 (mW) data X 10^- 3
The environment of the consumptive power and the temperature indicated in this register is as follows.
Amplifier
: 33MHz (PCICLK#)
Power voltage
: 5.25V (VDD5/3)
Ambient temperature : 70 degrees C
31
24
data
Bit size Field Name
rwcu
----- -------------- ----
31:24 data
r
Fig. 7.16 Data Register Map
reset
--------
undefined
description
------------------------------------------
These bits indicate the consumptive power and the
temperature of the state set in the data_select field.
102