MC68HC908RK2 Datasheet, PDF (95/158 Pages) Motorola, Inc – Microcontroller Unit

8.5 LVI Interrupts
The LVI module does not generate CPU interrupt requests.
LVI Interrupts
8.6 Low-Power Modes
The STOP and WAIT instructions put the MCU in low power-
consumption standby modes.
8.6.1 Wait Mode
The LVI module remains active in wait mode. The LVI module can generate a reset if a V_DD voltage below
the V_LVR voltage is detected.
8.6.2 Stop Mode
The LVI can be enabled or disabled in stop mode by setting the LVISTOP bit in the CONFIG register. See
Chapter 3 Configuration Register (CONFIG).
NOTE
To minimize STOP I_DD, disable the LVI in stop mode.
MC68HC908RK2 Data Sheet, Rev. 5.1
Freescale Semiconductor
95