MC68HC705C9A_1 Datasheet, PDF (48/157 Pages) Freescale Semiconductor, Inc – General Release Specification

Freescale Semiconductor, Inc.
General Release Specification _{Timer Interrupt}
4.5 Timer Interrupt
Three different timer interrupt flags cause a timer interrupt whenever
they are set and enabled. The interrupt flags are in the timer status
register (TSR), and the enable bits are in the timer control register
(TCR). Any of these interrupts will vector to the same interrupt service
routine, located at the address specified by the contents of memory
locations $3FF8 and $3FF9.
4.6 SCI Interrupt
Five different SCI interrupt flags cause an SCI interrupt whenever they
are set and enabled. The interrupt flags are in the SCI status register
(SCSR), and the enable bits are in the SCI control register 2 (SCCR2).
Any of these interrupts will vector to the same interrupt service routine,
located at the address specified by the contents of memory locations
$3FF6 and $3FF7.
4.7 SPI Interrupt
Two different SPI interrupt flags cause an SPI interrupt whenever they
are set and enabled. The interrupt flags are in the SPI status register
(SPSR), and the enable bits are in the SPI control register (SPCR).
Either of these interrupts will vector to the same interrupt service routine,
located at the address specified by the contents of memory locations
$3FF4 and $3FF5.
MC68HC705C9A — Rev. 2.0
Interrupts
For More Information On This Product,
Go to: www.freescale.com