|
MC68HC705C9A_1 Datasheet, PDF (134/157 Pages) Freescale Semiconductor, Inc – General Release Specification | |||
|
◁ |
Freescale Semiconductor, Inc.
General Release Speciï¬cation DC Electrical Characteristics
12.6 DC Electrical Characteristics
Table 12-1. DC Electrical Characteristics (VDD = 5.0 Vdc)(1)
Characteristic(2)
Symbol
Min
Typ
Max
Unit
Output Voltage
ILOAD = 10.0 µA
ILOAD = â10.0 µA
Output High Voltage
(ILOAD = â0.8 mA) PA7âPA0, PB7âPB0, PC6âPC0,
TCMP, PD7, PD0
(ILOAD = â1.6 mA) PD5âPD1
(ILOAD = â5.0 mA) PC7
Output Low Voltage
(ILOAD = 1.6 mA) PA7âPA0, PB7âPB0, PC6âPC0,
PD7, PD5âPD0, TCMP
(ILOAD = 10 mA) PC7
Input High Voltage
PA7âPA0, PB7âPB0, PC7âPC0, PD7,
PD5âPD0, TCAP, IRQ, RESET, OSC1
VOL
â
â
VOH
VDDâ0.1
â
VOH
VDDâ0.8
â
VDDâ0.8
â
VDDâ0.8
â
VOL
â
â
â
â
VIH
0.7 Ã VDD
â
0.1
V
â
â
V
â
â
0.4
V
0.4
VDD
V
Input Low Voltage
PA7âPA0, PB7âPB0, PC7âPC0, PD7,
PD5âPD0, TCAP, IRQ, RESET, OSC1
VIL
VSS
â
0.2 Ã VDD
V
Supply Current (4.5â5.5 Vdc @ fOP = 2.1 MHz)
Run(3)
Wait(4)
Stop(5)
25°C
â40 to 85 °C
â
3.5
5.25
mA
IDD
â
1.0
3.25
mA
â
1.0
20.0
µA
â
7.0
50.0
µA
I/O Ports Hi-Z Leakage Current
PA7âPA0, PB7âPB0 (Without Pullup)
PC7âPC0, PD7, PD5âPD0
IOZ
â
â
10
µA
Input Current
RESET, IRQ, OSC1, TCAP, PD7, PD5âPD0
Input Pullup Current(6)
PB7âPB0 (With Pullup)
IIN
â
â
1
µA
IIN
5
â
60
µA
Capacitance
Ports (as Input or Output)
RESET, IRQ, OSC1, TCAP, PD7, PD5, PD0
COUT
CIN
â
â
â
â
12
pF
8
Programming Voltage (25°C)
VPP
15.0
16.0
17.0
V
Programming Current (25°C)
IPP
â
â
200
mA
NOTES:
1. VDD = 5.0 Vdc ± 10%, VSS = 0 Vdc, TA = â40 to +85 °C, unless otherwise noted
2. Typical values reï¬ect measurements taken on average processed devices at the midpoint of voltage range, 25 °C only.
3. Run (operating) IDD measured using external square wave clock source; all I/O pins conï¬gured as inputs, port B = VDD,
all other inputs VIL = 0.2 V, VIH = VDDâ0.2 V; no DC loads; less than 50 pF on all outputs; CL = 20 pF on OSC2
4. Wait IDD measured using external square wave clock source; all I/O pins conï¬gured as inputs, port B = VDD, all other
inputs VIL = 0.2 V, VIH = VDDâ0.2 V; no DC loads; less than 50 pF on all outputs; CL = 20 pF on OSC2. Wait IDD is
affected linearly by the OSC2 capacitance.
5. Stop IDD measured with OSC1 = 0.2 V; all I/O pins conï¬gured as inputs, port B = VDD, all other inputs VIL = 0.2 V,
VIH = VDDâ0.2 V.
6. Input pullup current measured with VIL = 0.2 V.
MC68HC705C9A â Rev. 2.0
Electrical Specifications
For More Information On This Product,
Go to: www.freescale.com
|
▷ |